Fly your dream FINALLY, YOUR CHARGER GETS ITS OWN APP! Manufactured by SKYRC TECHNOLOGY CO., LTD. www.skyrc.com All specifications and figures are subject to change without notice.
TABLE OF CONTENTS INTRODUCTION...................................................................................................... 01 SPECIAL FEATURES............................................................................................. 03 WARNING AND SAFETY NOTES......................................................................... 06 LITHIUM BATTERY CONNECTION DIAGRAM.................................................... 10 PROGRAM FLOW CHART.....................................................
INTRODUCTION SPECIAL FEATURES Please read this entire operating manual completely and attentively before using this product, as it covers a wide range of information on operating and safety. Or please do use this product in company with a specialist! LCD Screen Optimized Operating Software SKYRC 6x80 Plus features the so-called AUTO function that set the feeding current during the process of charging or discharging.
SPECIAL FEATURES SPECIAL FEATURES Data Store/Load Automatic Charging Current Limit The charger can store up to 10 different charge/discharge profiles for your convenience. You can keep the data pertaining to program setting of the battery of continuous charging or discharging. Users can call out these data at any time without any special program setting.
WARNING AND SAFETY NOTES WARNING AND SAFETY NOTES These warnings and safety notes are particularly important. Please follow the instructions for maximum safety; otherwise the charger and the battery can be damaged or at worst it can cause a fire. Never leave the charger unattended when it is connected to its power supply. If any malfunction is found, TERMINATE THE PROCESS AT ONCE and refer to the operation manual. Keep the charger well away from dust, damp, rain, heat, direct sunshine and vibration.
WARNING AND SAFETY NOTES WARNING AND SAFETY NOTES Charging Discharging During charge process, a specific quantity of electrical energy is fed into the battery. The charge quantity is calculated by multiplying charge current by charge time. The maximum permissible charge current varies depending on the battery type or its performance, and can be found in the information by the battery manufacturer.
LITHIUM BATTERY CONNECTION DIAGRAM SKYRC 6x80 Plus comes with the built in switching power supply. You can connect the AC power cord directly to the main AC socket. (100-240V AC). For attaching directly to 12V car batteries. It is critically important that you use a fully charged 13.8V car battery. LITHIUM BATTERY CONNECTION DIAGRAM This diagram shows the correct way to connect your battery to the SKYRC 6x80 Plus while charging in the balance charge program mode only.
SELECT PROGRAM SELECT LiPo BATT PROGRAM SELECT Lilo BATT SELECT PROGRAM SELECT LiFe BATT SELECT PROGRAM SELECT Li BATT METER SELECT PROGRAM SELECT SERVO TESTER SELECT PROGRAM SELECT MOTOR RPM TESTER SELECT START START ENTER START ENTER START ENTER START ENTER START ENTER START ENTER PROGRAM SELECT NiCD BATT PROGRAM SELECT NiMH BATT ENTER START ENTER START ENTER START START ENTER START ENTER ENTER START STOP PROGRAM SELECT Pb BATT SELECT ENTER MODE PROGRAM SELECT BAT
OPERATION LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM The most important tool to operate the charger is the red rotary dial and black button. Mode/Stop Button Enter/Start Rotary Dial Enter/Start Rotary Dial The dial has three functions: rotating the dial in both directions will scroll through menus and adjust parameters quickly and easily, and pressing down on the dial acts as button which is often used to enter parameter alert or store parameters on-screen.
LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM This screen displays the number of cells you set up and the processor detects. R shows the number of cells detected by the charger and S is the number of cells set by you at the previous screen. If both numbers are identical you can start charging process. If not, press button to go back to previous screen to recheck the number of cells of the battery pack before going ahead.
LITHIUM BATTERY(LiPo/LiFe/LiIon)PROGRAM Press Dial Charging Supplied Current Number time capacity voltage battery of Charge cells current identical you can start charging process. If not, press button to go back to previous screen to recheck the number of cells of the battery pack before going ahead. This screen shows the real-time status during charge process. Press button once to stop the charge process. This program is for charging or discharging Lithium battery which will not be used for long time.
NIMH/NICD BATTERY PROGRAM NIMH/NICD BATTERY PROGRAM These programs are for charging or discharging NiMH (Nickel-MetalHydride) or NiCd (Nickel-Cadmium) battery. CHARGING OF NIMH/NICD BATTERY The charger will charge NiMH and NiCd batteries using the charge current set by the user. This program is for charging of NiMH/NiCd NiMH CHARGE batteries. You can press Start/Enter dial to CURRENT 2.
NIMH/NICD BATTERY PROGRAM NiMH DSC PB( LEAD-SULPHURIC ACID) BATTERY PROGRAM The screen indicates the discharging state. You can rotate the Start/Enter dial to alter discharge current and repress the dial to store the value. Press Mode/Stop button to Discharged capacity stop discharging. The audible sound indicates the end of process. 0.1A 7.
USING THE CHARGE CONTROL SOFTWARE “CHARGE MASTER” The screen displays the current state of discharge. You can alter the discharge current by pressing Start/Enter dial during Battery Battery Elapsed voltage the process. Once you find the desired time type Discharge Discharged current value by rotating the dial, store it by current capacity repressing the dial. To stop discharging, press Mode/Stop button once. The audible sound indicates the end of process.
BATTERY MEMORY SET TVC=YOUR RISK 4.20V LITHIUM BATTERY METER Set the terminal voltage, which can be adjusted(4.18-4.30V). SELECT SELECT TEMPERATURE CUT-OFF 50C The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage. Please connect the battery to the charger main battery lead to battery socket and balance wires to balance socket. Set the cut-off temperature, which can be adjusted(20 C/68 F-80 C/176 F).
MOTOR RPM TESTER SERVO TESTER The charger can test motor RPM. Please do as follows, 1. Connect the motor and ESC. 2. Switch off the ESC and connect it to the battery. 3. Connect the power to the charger. 4. Insert the ESC signal wire to ESC port in the charger. 5. Connect the motor and charger with motor sensor wire. There is a motor sensor port beside the temp sensor. 6. Enter Motor RPM Tester Program, set the initial pulse width which should be the same as the neutral position of the transmitter.
SYSTEM SET UP SYSTEM SET UP It will be operated with the default value of the essential user settings when it is connected to a DC 11~18V battery for the first time. The screen displays the following information in sequence and the user can change the value of parameter on each screen. When you are willing to alter the parameter value, press the dial to make it blink then change the value by rotating the dial clockwise or counterclockwise. The value will be stored by repressing the dial.
VARIOUS INFORMATION DURING THE PROCESS LOAD FACTORY SET ENTER Press and hold the Start/Enter dial for 3 seconds to load the factory set. SELECT 1.00 This screen shows the version. VARIOUS INFORMATION DURING THE PROCESS You can inquire various information on LCD screen during charging or discharging process. When you rotate the dial counterclockwise, the screen will display the user’s settings.
PAIRING CHARGER WITH SMART PHONES PAIRING CHARGER WITH SMART PHONES Pairing occurs when two Bluetooth devices communicate with each other and establish a connection. A record of information about this connection is then stored in the memory of each device. Once you pair a device with the 6X80 charger, you should not have to pair it again. The 6X80 charger can pair with up to eight devices. However, it can only connect to, and control the 6X80 charger from one device at a time.
SPECIFICATION RECOMMENDED ACCESSORIES SPECIFICATION AC Input 100-240V DC Input 11-18Volt Charge circuit power AC Input 50W DC Input 80W Charge current range Discharge current power 0.1-10.0A Discharge current range 0.1-5.0A Current drain for balancing port 200mA/cell NiCd/NiMH battery cell count 1-15Cells LiPo/LiFe/Lilon cell count 1-6Cells Pb battery voltage 2-20V Net weight 525g Dimension 135x112x60.9mm Temp.
LIABILITY EXCLUSION WARRANTY AND SERVICE This charger is designed and approved exclusively for use with the types of battery stated in these Instruction Manual. SKYRC accepts no liablility of any kind if the charger is used for any purpose other than that stated. We are unable to ensure that you follow the instructions supplied with the charger, and we have no control over the methods you employ for using, operating and maintaining the device.
SCAN WITH YOUR SMART PHONE FINALLY, YOUR CHARGER GETS ITS OWN APP! Scan with your iPhone to download. Scan with your Android to download.
