SKYBD200 BD200 Discharger Manual V1.20

PC SOFTWARE
PC software supplied with the BD200 is easy to use, intuitive. There
are two discharge mode: 1. Constant Power; 2. Constant Current.
The software can automatic sensing of battery cell count and
recommends a minimum safe discharge voltage. Discharge tests
may be viewed in Amp Hours, Watt Hours or Minutes. Results can
be graphed as Voltage vs. Amp hours, Watt hours, Minutes.
-3- -4-
When there is an error, digital LED will display the error code
ERROR MESSAGE
Input voltage is too high. This discharger accepts battery voltage from 5.4
to 35V, if voltage higher than 35V, it will stop working and show error
message.
WARRANTYANDSERVICE
We guarantee this product to be free of manufacturing and assembly defects for a period of one year from the time of
purchase. The warranty only applies to material or operational defects, which are present at the time of purchase. During
that period, we will repair or replace free of service charge for products deemed defective due to those causes.
This warranty is not valid for any damage or subsequent damage arising as a result of misuse, modification or as a result of
failure to observe the procedures outlined in this manual.
The warranty service is valid in China only.
If you need warranty service overseas, please contact your dealer in the first instance, who is responsible for
processing guarantee claims overseas. Due to high shipping cost, complicated custom clearance procedures to
send back to China. Please understand SkyRC can't provide warranty service to overseas end user directly.
If you have any questions which are not mentioned in the manual, please feel free to send email to
[e-mail]
Note:
1.
2.
3.
RoHS
Manufacturedby
SKYRCTECHNOLOGYCO.,LTD.
www.skyrc.com
7504-0974-02
LiPo
LiHV
NiMH
2S
3S
4S
5S
6S
7S
8S
2S
3S
4S
5S
6S
7S
8S
6S
7S
8S
9S
10S
11S
12S
13S
14S
15S
16S
17S
18S
19S
20S
6.0
9.0
12.0
15.0
18.0
21.0
24.0
6.2
9.3
12.4
15.5
18.6
21.7
24.8
5.4
6.3
7.2
8.1
9.0
9.9
10.8
11.7
12.6
13.5
14.4
15.3
16.2
17.1
18.0
8.40
12.60
16.80
21.00
25.20
29.40
33.60
8.70
13.05
17.40
21.75
26.10
30.45
34.80
9.00
10.50
12.00
13.50
15.00
16.50
18.00
19.50
21.00
22.50
24.00
25.50
27.00
28.50
30.00
30.00
22.20
16.60
13.30
11.10
9.52
8.33
30.00
21.50
16.12
12.90
10.75
9.21
8.06
30.00
30.00
27.77
24.69
22.22
20.20
18.51
17.09
15.87
14.81
13.88
13.07
12.34
11.69
11.11
23.80
15.87
11.90
9.52
7.93
6.80
5.95
22.98
15.32
11.49
9.19
7.66
6.56
5.74
22.22
19.04
16.66
14.81
13.33
12.12
11.11
10.25
9.52
8.88
8.33
7.84
7.40
7.01
6.66
Over-temperature protection.
Input voltage is too low. This discharger accepts battery voltage from 5.4
to 35V, if voltage lower than 5.4V, it will stop working and show error
message.
Min. Cut-off
Voltage
No. of
Cell
Battery
Type
Voltage
Min. Discharge Current (A)
Discharging power: 200W
Max. Discharge Current (A)
Discharging power: 200W
MAXIMUM DISCHARGE POWER CHART
OPTIONAL PARTS
Banana Plug
(SK-600023-08)
LiPoPal (SK-500007)
Dean Plug
(SK-600023-09)
Tamiya Plug
(SK-600023-10)
The LiPoPal can check the voltage of each cell of
a lithium battery pack and remaining capacity in
percentage % during discharging process.
Following charging cables are not included in the package.
You need purchase them separately.
Improper usage may lead to fire, property damage and physical injury.
SAFETY NOTE
Never discharge a battery below its recommended cutoff voltage. Over-discharge may damage battery and cause
FIRE or EXPLOSION.
Never discharge a battery at a higher discharge rate than it is designed for.
Never leave the discharger unattended when it is connected to battery. If any malfunction is found,
TERMINATE THE PROCESS AT ONCE.
Place the discharger and battery on a non-flammable surface, and keep away from inflammables.
Never discharge swollen, leaky, or damaged batteries.
Batteries shall be discharged within a room temperature range of 10-40℃.
Disconnect the battery and discharger once discharging has finished.
Recharge batteries immediately with an appropriate battery charger after discharge process is completed.
Some battery types do not like to remain discharged for extended periods of time.