Instructions

Special Features
Voltage Calibration (for expert user only)
SkyRC T200 allows you to calibrate the voltage directly on the device with a 6S LiPo
battery. (For more information please contact us at [e-mail])
Battery Memory (Data Store/Load)
The charger can store up to 10 different charge/discharge profiles for each channel.
You can keep the data pertaining to program setting of the battery of continuous
charging or discharging. Users can call out these data at any time without any
special program setting.
Terminal Voltage Control(TVC)
The charger allows user to change the end voltage. (for expert user only)
Balancing Individual Cells Battery During Discharging
During the process of discharging, SKYRC T200 can monitor and balance each cell
of the battery individually. Error message will be indicated and the process will be
ended automatically if the voltage of any single one cell is abnormal.
03 ·
T200
Fast Charge and Storage Mode of Lithium Battery
Function of the two modes differs from each other. “FAST CHG” minimizes battery
charge time, while “STORAGE” has the capacity to control the final battery voltage,
which is necessary and helpful for a rarely used battery.
Memory of Last Operation
SkyRC T200 will memorize your last operation of charging/discharging before power
off.
AGM Charge and Cold Charge
For Pb batteries, there are two more charging modes: AGM charge and Cold charge.
Dual Channel Charger
SkyRC T200 allows you to charge 2 batteries with different chemistries
simultaneously, and it will intelligently and automatically initiate the charging to their
maximum capacity. Charging of each channel is 100Watts. Total output power of this
charger is 200Watts.
Optimized Operating Software
SkyRC T200 features the co-called AUTO function that sets the feeding current
during the process of charging/discharging. For Lithium batteries, it can help prevent
overcharging which may lead to explosion. It will disconnect the circuit automatically
and alarm once detecting malfunction, to achieve maximum safety and minimize the
trouble. All the settings can be configured by users.