Instructions

Special Features
Automatic Charging Current Limit
You can set up the upper limit of the charging current when charging your NiMH or
NiCd battery, it is useful for the NiMH battery of low impedance and capacity in the
'AUTO' charging mode.
Re-Peak Mode of NiMH/NiCd Battery
In re-peak charge mode, the charger can peak charge the battery once, twice or
three times in a row automatically. This is good for making the battery fully charged.
Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge > discharge or discharge > charge is
operable for battery refreshing and balancing to stimulate the battery's activity.
Battery Voltage Meter
The user can check battery's total voltage, the highest voltage, the lowest voltage
and each cell's voltage.
Capacity Limit
The charging
capacity
is
always
calculated as
the
charging current
multiplied by
time.
If the
charging
capacity exceeds
the
limit,
the
process
will
be
terminated
automatically when you set the maximum value.
Temperature Threshold*
The battery's internal chemical reaction will cause the temperature of the battery to
rise. If the temperature limit is reached, the process will be terminated.
* This function is only available by connecting optional temperature probe, which is
not included in the package.
Processing Time Limit
You can also limit the maximum process time to avoid any possible defect.
Battery Internal Resistance Meter
The user can check battery voltage and battery internal resistance.
· 04
T200