INSTRUCTION MANUAL TOUCH SENSITIVE 3.2” (320x240 dot) COLOR LCD SCREEN 7 55 Manufactured by SKYRC TECHNOLOGY CO., LTD. www.skyrc.com All specifications and figures are subject to change without notice. Printed in China 2013 7504-0339-01 Version 1.
TABLE OF CONTENTS INTRODUCTION INTRODUCTION 01 MAIN FEATURES 03 WARNING AND SAFETY NOTES 05 HOMEPAGE 07 OPERATION PROGRAM 08 CHARGING STATUS MONITOR 13 USING THE CHARGE CONTROL SOFTWARE “CHARGE MASTER” 13 BATTERY METER 14 MEMORY PRESET-DATA STORE/LOAD 15 SETTING 16 ERROR MESSAGE 18 SPECIFICATION 19 RECOMMENDED ACCESSORIES 20 CONFORMITY DECLARATION AND LIABILITY EXCLUSION 21 WARRANTY AND SERVICE 21 INTRODUCTION Congratulations on your choice of the SKYRC T6755 AC/DC Input Prof
INTRODUCTION MAIN FEATURES FEATURES Touch System Equipped with a 3.2” touch sensitive color LCD screen, it is intuitive as all the operating and changing status can be displayed in this screen. What's more, the touch screen can register the users' input precisely so that the users can have a wonderful and comfortable “touch” experience. Color LCD Touch Screen 3.
MAIN FEATURES WARNING AND SAFETY NOTES WARNING AND SAFETY NOTES Terminal Voltage Control (TVC) The charger allows user to set the charge/discharge end voltage. Battery Meter The user can check Lithium battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage; and can check Nickel and Pb battery's total voltage. Re-Peak Mode of NiMH/NiCd Battery In re-peak charge mode, the charger can peak charge the battery once, twice or three times in a row automatically.
WARNING AND SAFETY NOTES HOMEPAGE Charging HOMEPAGE During charge process, a specific quantity of electrical energy is fed into the battery. The charge quantity is calculated by multiplying charge current by charge time. The maximum permissible charge current varies depending on the battery type or its performance, and can be found in the information by the battery manufacturer.
OPERATION PROGRAM OPERATION PROGRAM OPERATION PROGRAM 2. Battery Setting There are 3 basic parameter settings you have to set according to your battery. They are battery type, battery cells and battery capacity. How to operate the charger? ▲ ▲ Browse - Touch the arrow ▲ and ▼ or and to browse all the selections Confirm – Touch your selection on the screen to for confirmation Start – Touch start button START or touch and hold the operation program for 3 seconds to start the program. 1).
OPERATION PROGRAM OPERATION PROGRAM ▲ ▲ allowed Max Rate is adjustable independently, so the Battery Capacity setting mainly provides additional safety monitoring. Touch the arrow and to select the charge/discharging current if you want to modify. CAUTION! BE SURE you know what Charge/Discharge Current setting to use for your battery. 3. Charging Program Depends on different battery type, the operation programs are different. Batt Type Operation Program 4.
OPERATION PROGRAM CHARGING STATUS MONITOR CHARGING STATUS MONITOR 5. Program Stop In charging/discharging progress, touch “STOP” to stop the progress and back to homepage. LiPo 6S C6.0A / D2.0A P1 LiPo 6S BATT TYPE BAL CHARGE P1 C6.0A / D2.0A OPERATION LiPo CAPACITY: 40mAh VOL: 16.7V Pb FAST CHG TIME: 00: 02: 00 E.TEMP: 0 C LiPo BAL CHARGE CURRENT: 2.0A I.
BATTERY METER MEMORY PRESET-DATA STORE/LOAD BATTERY METER MEMORY PRESET-DATA STORE/LOAD The user can check lithium battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage; and can check Nickel and Pb battery's total voltage. Touch start button or touch and hold “Volt Meter” for 3 seconds to enter voltage meter program.
SETTING SETTING SETTING 1. SYSTEM SETTING SELECTION ITEM DESCRIPTION ON/OFF BUZZER ON/OFF The beep sounds at every time touching the screen to confirm your action. The beep or melody sounded at various times during operation to alert different mode changes. LCD LIGHT 1-5 The brightness of the LCD can be adjusted basing on personal preference. THEME BLUE, RED, YELLOW, GREEN Different color theme can be selected basing on personal preference. System information: model no., serial no.
ERROR MESSAGE SPECIFICATION ERROR MESSAGE SPECIFICATION It incorporates a variety of functions for the systems to verify processes and the state of the electronics. In case of an error the screen will display the cause of error and emit an audible sound. AC Input 100-240V DC Input Charge circuit power 11-18Volt 55W ERROR MESSAGE EXPLANATION The internal temperature of the unit goes too high. Charge current range Discharge current power 0.1-7.0A "INT. TEMP TOO HIGH" "EXT.
RECOMMENDED ACCESSORIES CONFORMITY DECLARATION RECOMMENDED ACCESSORIES CONFORMITY DECLARATION SKYRC T6755 satisfies all relevant and mandatory EC directives and FCC Part 15 Subpart B: 2008.
