User's Manual

ManualsBrandsSkyrocket Toys ManualsDronesSky Viper Nano Drone-Remote

1 2

3 4

OFF

LOW

OFF

HIGH

Online Video

Instructions & Flying

Tips available now at

SKYVIPER.COM

FLYING TIPS

POWERING UP AND PAIRING (WITH ALTITUDE ON)

FLYING GUIDE

Press Auto Launch to launch a few feet off the ground.

Press the directional Thumbstick to fly in any direction.

Press the Altitude button to fly approximately 12” higher or lower.

Press the Auto Land button to land.

Turn on drone. Turn on remote. Wait for flashing green lights to turn solid.

FLYING BASICS

Place drone on flat surface.

TOGGLE INTO MANUAL FLIGHT WHILE IN AUTO-HOVER

• Hold stunt button and press auto land/auto launch button

and a tone will sound from the remote. Make sure your

throttle stick is in the down position.

• After the tone is heard, move the throttle stick up until

the drone starts to rise. (If throttle is not matched in

5 seconds then manual flight will be cancelled.)

TOGGLE INTO AUTO HOVER WHILE IN MANUAL FLIGHT

• Press either the up or down altitude locking button to

toggle back into auto hover. (Your drone will hover at the

current throttle.)

TOGGLE INTO MANUAL FLIGHT BEFORE TAKE-OFF

• Hold stunt button and press auto land/auto launch button

and a tone will sound from the remote. Make sure your

throttle stick is in the down position.

• Push the throttle stick up to begin manual flight.

FLIGHT CONTROLS

DIRECTION STICK

• Push the direction stick forward to fly forward or

away from you (Green blade in front). Push

backwards to fly backward. The further you push,

the faster the drone will fly in that direction.

• Push the direction stick left to fly left. Push right

to fly right. The further you push, the faster

the drone will fly sideways.

FLIGHT SENSITIVITY SWITCH

The Drone’s responsiveness may be adjusted on the Controller to match your flying skills.

There are three choices: 1 LOW sensitivity 2 HIGH sensitivity

It is best to start in the low sensitivity position until you have mastered flying. Flight sensitivity

can be adjusted before or during flight.

THROTTLE/

ROTATION STICK

Press up to

fly forward

Press down

to fly

backward

Press left

to fly left

Press right

to fly right

DIRECTION STICK

Press up

to lift

Press down

to descend

Press left

to rotate

counter-

clockwise

Press right

to rotate

clockwise

NANO DRONE

ONOFF

Stunt Button

Rotation Trim

Left/Right Trim

Forward/Backward Trim

Power On/off Switch/sensitivity Switch

Power indicator LED

THROTTLE/ROTATION STICK

• While in manual flight mode push the throttle

stick forward to make drone lift.

• The further you push the throttle stick, the

faster you lift.

Up and down controls only apply to manual

flight mode.

(

ALTITUDE BUTTONS

• Press the up or down arrow to adjust

the drone’s altitude. The drone will lift

or lower approximately 12” each time

the up or down arrow is pressed.

(Distance may vary.)

• Hold the up or down buttons for

continuous lift or descent.

AUTO LAUNCH/LAND BUTTON

• Press the auto launch

button to launch a few feet

from the ground.

(Exact height may vary.)

• Press the auto land button

to land the drone by itself.

• When launching the drone, face the same

direction as the drone. Green blades and green

LEDs should be in front.

• If your drone drifts in any direction when you are

hovering, you will need to make Trim

adjustments to correct the driving. Trim

adjustments are sometimes needed when the

drone is first flown after purchase. See TRIM

ADJUSTMENTS section for details.

• Practice launching, hovering and landing before

attempting to learn other moves.

• Flying 2 to 3 feet above the ground will reduce

ground turbulence and make flying easier.

• When first attempting to fly in different

directions, start by tapping the direction stick

until you have a feel for it. Always move controls

slowly until you become comfortable operating

the drone.

• Once you’ve mastered flying in directions,

practice rotational controls. Spinning and

keeping drone facing the same direction as you

makes flying easier and more intuitive.

• Stay 2 to 3 feet away from walls and ceilings

as drone will be drawn towards them if you fly

too close.

• If propeller blades come in contact with

another object or you crash, throttle down or

auto land immediately to prevent possible or

further damage.

• If anything prevents drone’s blades from

spinning or they become jammed, throttle

down or auto land immediately. Do not attempt

to fly until obstruction has been removed and

damage fixed.

• Should something prevent drone’s blades from

spinning, drone may auto shutdown. LiPo

battery will need to be unplugged then

reconnected to restore flying power.

• If the drone flies too far away, beyond the

control range of the remote, the drone will

auto-land to prevent the drone from flying away

out of control.

01598

Summary of content (2 pages)

PAGE 1
FLYING GUIDE 01598 NANO DRONE POWERING UP AND PAIRING (WITH ALTITUDE ON) OFF ON Place drone on flat surface. Turn on drone. Turn on remote. Wait for flashing green lights to turn solid. FLYING BASICS 1 TOGGLE INTO MANUAL FLIGHT BEFORE TAKE-OFF • Hold stunt button and press auto land/auto launch button and a tone will sound from the remote. Make sure your throttle stick is in the down position. • Push the throttle stick up to begin manual flight.
PAGE 2
TRIM ADJUSTMENTS If the drone drifts in any direction while hovering (and you are not pressing the direction stick), you may need to make trim adjustments. Press the recommended trim button as described below to make adjustments. Tip 1: When the remote LED flashes 3 times quickly, the trim will revert back to middle of trim range. Tip 2: If you are uncomfortable trimming the drone in flight, you can land onto a flat surface and make your trim adjustments.