Operation Manual

2
1 Make sure all items listed on the front of this guide are included in the box.
2 READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT.
3
MAKE MAKE SURE THAT YOU HAVE COMPLETELY CHARGED THE BATTERY PRIOR TO FIRST USE FOR MAXIMUM BATTERY
LIFE.
4 Study this setup diagram.
5 Place product in an appropriate position for operation.
6 Make sure all input devices such as microphones, CD players, mp3 players, and
linked amplifiers/PAs are turned off and volume settings are set at “zero”
7 Connect all devices as shown above.
8 Connect the stereo outputs to the power amplifier(s), tape decks, and/or audio
sources.
9. Switch everything on in the following order.
■audio input sources (i.e. microphones, instruments, CD/MP3 Players)
■BLOCK ROCKER
■last, any amplifiers
10. When turning off, always reverse this operation by,
■turning off amplifiers
■BLOCK ROCKER
■last, any input devices