Operation Manual

4
Streaming from your Smartphone:
- Make sure your BT is switched ON, on your smartphone.
- After around 10 seconds the PA-200 will come up as DJ Device 01
- Push the sync button on the PA-200
- If required press 0000 as passcode.
CONTROL PANEL:
22. MICROPHONE 1 BALANCED INPUT WITH GAIN CONTROL(1/4” AND XLR):This jack can either take a 1/4” balanced or a XLR balanced cable.
An XLR Cable is included with the microphone.
23. INSTRUMENT/MICROPHONE 2 INPUT WITH GAIN CONTROL(1/4”): This mono input accepts a 1/4” input such as a microphone, guitar, or other
musical instrument.
24. USB/SD/AUXULIARY INPUT WITH GAIN CONTROL (STEREORCA): This knob controls the level of the USB/SD and the RCA input. This stereo
RCA input can be used to connect a CD, MP3, or other audio source. To connect to a portable device with a 1/8” headphone jack, you need a
standard (1/8” to RCA) adapter which is NOT included.
25. MASTER VOLUME CONTROL: This knob controls the master volume of the.
POWER PANEL:
26. POWER ADAPTER(IEC): Insert the included power cable here to charge the unit. Note that the can run off the power adapter while it
simultaneously charges the battery. The charge indicator illuminates when the battery is charging.
27. VOITAGE SELECTOR: Set this to the correct voltage for your location standard.
28. POWER ON/OFF SWITCH
29. USB/SD CHARGING SWITCH
30. BATTERY LEVEL INDICATOR: While the unit is powered ON, these four lights indicate the power left in the battery. Battery life varies based on
volume and usage.
31. LINK OUTPUT: This 1/4” jack is a stereo line level output that can be connected to the stereo input of an amplifier
or amplified loudspeaker such as another.