Operation Manual

FUNCTIONS
FRONT PANEL
1. MIC (6x) 6.3mm/XLR combi jack for a microphone to the 6 channels
2. INPUT SELECTOR (6x) Input signal selector switch for the 6 channels
3. GAIN (6x) Preset of the input volume of the 6 channels
4. HIGH (6x) Treble control for the 6 channels
5. MID (6x) Mid control for the 6 channels
6. BASS (6x) Bass control for the 6 channels
7. EFFECT (6x) Echo level for the 6 channels
8. CHANNEL (6x) Volume slider controls
9. TALK OVER Switch that attenuates the sound of every channel when the
mic is used
10. PFL (6x) Selects the channel which is heard through the headphones
11. CUT ON/OFF switch of the channel which is set for the crossfader
12. ASSIGN Channel selection knob for the crossfader function
13. CROSSFADER Slider control for fast fading between the selected channels
14. LIGHT 12V 12 Volts lamp connector
15. POWER ON/OFF switch of the mixer
16. VU METER Displays the output signal strength
17. MASTER/PFL Selects the signal to be displayed on the VU-meter
18. REPEAT Sets the number of repetitions (echo)
19. DELAY Sets the delay time of the echo
20. ECHO VOLUME Echo volume
21. START/STOP Echo ON/OFF
22. MASTER 1 Sets the output volume of MASTER 1 output
23. MASTER 2 Sets the output volume of MASTER 2 output
24. PFL LEVEL Volume control of the headphone output
25. HEADPHONE 6.3mm Jack connector for a headphone
REA PANEL
30. POWER INPUT Mains inlet
31. FUSE Fuse
32. REC RCA sockets for connection to a recorder
33. MASTER 2 RCA sockets to the (first) amplifier
34. MASTER 1 RCA sockets to the (second) amplifier
35. CHANNEL PHONO & LINE RCA sockets for connection of the different channels to
PHONO and LINE units