User's Manual
Operation:
1. Before use this receiver first need press “LEARN” button to finish learning mode
then can operate.
Learn step: a. Press “Learn” button, receiver will beep around two second.
b. Press transmitter any button ,If receiver have five short beep that
mean finish learn mode.
2. Press “MODE” button can switch receiver output mode as below:
3. OFF(outlet1&2 all off) Outlet1 output ON- Outlet2 output ON-
Outlet1&outlet2 output ONOFF…...
4. If receiver had got three transmitter then it need have “learn clear ID”
procedure.Its method is press and hold “Learn” button over 6 second then release
button .If ok , receiver will beep three times.
FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may
cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment.