User's Manual

THERMOSTAT FUNCTION

SETTING DESIRED ROOM

TEMPERATURE

This remote control system can be

thermostatically controlled when the transmitter

is in the THERMO mode (The word THERMO

must be displayed on the screen). To set the

THERMO MODE and DESIRED room

temperature,

Press the SET key until the LCD screen shows the word THERMO, then the remote is

in the thermostatic mode.

Press and hold the SET key until the desired set temperature is reached, (By pressing

and holding the set key the LCD screen set numbers will increase from 45° to 99°

then restart over at 45°) Next release the SET key. The LCD screen will display the set

temperature for 3 seconds and the LCD screen will flash the set temperature for 3

seconds, then the LCD screen will default to display the room temperature.

TO CHANGE THE SET TEMPERATURE

Press and hold the SET key until the desired set temperature is reached. (By pressing

and holding the set key the LCD screen set numbers will increase from 45° to 99°

then restart over at 45°) Next release the SET key. The LCD screen will display the set

temperature for 3 seconds, then will flash the set temperature for 3 seconds, then the

LCD screen will default to display the room temperature.

Press either ON or OFF key to disengage the thermo mode. The word THERMO on

the LCD screen will not show when the thermo is not in operation.

NOTE: The highest SET temperature is 99° FAHRENHEIT (37° Celsius ) and the

lowest temperature is 45° Fahrenheit (8° Celsius )

OPERATIONAL NOTES:

The Thermo Feature on the transmitter operates the appliance whenever the ROOM

TEMPERATURE varies a certain number of degrees from the SET TEMPERATURE.

This variation is called the “SWING” or TEMPERATURE DIFFERENTIAL. The

THERMO