User's Manual

normal operating cycle of an appliance may be 2-4 times per hour depending on how
well the room or home is insulated from the cold or drafts. The factory setting for the
“swing number” is 1. This represents a temperature variation of +/-1° F (0.5
℃
)
between SET temperature and ROOM temperature, which determines when the
fireplace will be activated. This function is pre-set at the factory.
The transmitter has ON and OFF manual functions that are activated by pressing
either button on the face of the transmitter. When a button on the transmitter is
pressed the word ON or OFF will appear on the LCD screen to show while the signal
is being sent. Upon initial use, there may be a delay of three seconds before the
remote receiver will respond to the transmitter. This is part of the system’s design.