User's Manual
The low battery icon on the left side of the
LCD screen will appear when battery power
has dropped significantly. At this time,
approximately two weeks of battery power
remains until the transmitter may experience
partial or complete loss of functions.
CHILDPROOF “LOCK-OUT” –(CP)
This SKYTECH remote control includes a
CHILDPROOF “LOCK-OUT” feature that allows the user to “LOCK-OUT”
operation of the appliance, from the TRANSMITTER.
SETTING “LOCK-OUT” –(CP)
1. To activate the “LOCK-OUT” feature,
press and hold the UP and TIME/TIMER
buttons, together, for 5seconds. The letters
CP will appear in the TEMP frame on the
LCD screen.
l To disengage the “LOCK-OUT”, press and
hold the UP and TIMER buttons, together
for 5 seconds or more, and the letters CP
will disappear from the LCD screen and
the transmitter will return to its normal
operating condition.
NOTE: If the appliance is already operating in the ON or THERMO MODES,
engaging the “LOCK-OUT” will not cancel the operating MODE. Engaging the
“LOCK-OUT” prevents only the manual operation of the TRANSMITTER. If in the
auto modes, the THERMO operation will continue to operate normally. To totally
“LOCK-OUT” the operation of the TRANSMITTER’S operating signals; the
transmitter’s MODE must be set to OFF.
TRANSMITTER
The SKYTECH remote control operates, on RF (radio frequency) signals that are sent
by the TRANSMITTER (remote) to the RECEIVER that operates the appliance. It is
recommended that the TRANSMITTER always be located within the 20 foot
operating range, preferably in the same room in which the appliance is located.
PM
ROOM
TIMER
F
ON
OFF
THERMO
FLAME
F
SET
PM
FLAME
ON
OFF
THERMO
TIMER
ROOM
F
SET
F