User's Manual

ManualsBrandsSkytech II ManualsElectronicsTransmitter

FUNCTIONAL SPECIFICATION

SPTS-H/L-TH TRANSMITTER

Revision History

Rev. 0: Initial Release. M.R. 5/26/2011.

Rev. 1: Clarified cycling between settings when in Day/Time and Program Setup modes (wait 5-seconds)

and clarified Time setting sequence (advance in 1-minute increments, hour advances every 60 minutes,

AM/PM cycle every 12-hours). M. Rogers 6/1/2011.

Rev. 2: Updated Touch-Screen LCD and Button layout graphic. Changed MODE Button to MODE/SET

Button, added use of MOD/SET Button to accept setting adjustments, increased automatic acceptance time

from 5 to 15 seconds. Separated hour and minute time settings with addition of SET button. Added

MODE/SET button to Program mode deactivation. Changed temperature unit type selection to two button

press (UP and DOWN) to agree with other model transmitters, clarified SWING temperature setting and

display. Changed MAIN flame displays to FLAME-A Icon & clarified FLAME Zone display under

Program ON operation. Removed references to FLAME Icon in MODE Zone display. Changed SET

TEMP to 2-second automatic. M. Rogers 6/13/2011.

Rev. 3: Added specific model number. M. Rogers 12/19/2011.

Rev. 4: Clarified Low Battery Indicator voltage limit (5.0V), removed Manual OFF from communication

safety feature. M. Rogers 12/20/2011.

Rev. 5: Added factory default thermostat SET TEMPERATURE, Clarified LCD display in Flame-A

adjustment mode, clarified backlight requirement during Child-Lock operation. M. Rogers 12/21/2011.

Rev. 6: Clarified Program ON flame zone display (THERMO ON vs THERMO OFF). M. Rogers

12/27/2011.

Rev. 7: Added Thermostat Disable Feature & Room Temperature Limit Feature. M. Rogers 3/22/2012.

Rev. 8: Clarified Thermostat Disable Feature (TX must be in MANUAL OFF Mode to activate/deactivate

feature. M. Rogers 3/27/2012

Summary of content (7 pages)

PAGE 1
FUNCTIONAL SPECIFICATION SPTS-H/L-TH TRANSMITTER Revision History Rev. 0: Initial Release. M.R. 5/26/2011. Rev. 1: Clarified cycling between settings when in Day/Time and Program Setup modes (wait 5-seconds) and clarified Time setting sequence (advance in 1-minute increments, hour advances every 60 minutes, AM/PM cycle every 12-hours). M. Rogers 6/1/2011. Rev. 2: Updated Touch-Screen LCD and Button layout graphic.
PAGE 2
Objective Define basic construction, touch-screen LCD & button layout, and operational parameters for a wireless transmitter to operate the AF-4000MOD-1 ignition control module. Basic Construction • Transmitter body should be the same construction as current production model SKY5301P. • Touch-Screen LCD and three push buttons will allow input from users. • LCD screen will provide system status & input feedback to user. • Blue Backlight will illuminate LCD screen for 5 seconds after any user input.
PAGE 3
Functional Description Note: All function adjustments will be automatically accepted 15-seconds after pressing a given touch zone or button. The user may press the MODE/SET button to immediately accept the adjustment manually. Day and Time Display • The current day of week and time of day will be continuously displayed in the TIME/PROG Zone (except during Setup operations).
PAGE 4
o SET TEMP Zone: Blank o LIGHT Zone: Blank o FAN Zone: Blank o TIME/PROG Zone: Current day indicator and current time is displayed o AUX Zone: Blank o FLAME Zone: Blank MANUAL ON Mode: • Transmits flame ON command • LCD Displays: o MODE Zone: ON is displayed o ROOM TEMP Zone: Measured temperature is displayed o SET TEMP Zone: Blank o LIGHT Zone: Blank o FAN Zone: Blank o TIME/PROG Zone: Current day indicator and current time is displayed o AUX Zone: Blank o FLAME Zone: the FLAME-A Icon is displayed THERMOST
PAGE 5
• o FAN Zone: Blank o TIME/PROG Zone: Current day indicator and current time is displayed o AUX Zone: Blank o FLAME Zone: Blank THERMOSTAT ON LCD Displays: o MODE Zone: THERMO and ON are displayed o ROOM TEMP Zone: Measured temperature is displayed o SET TEMP Zone: SET TEMP is displayed o LIGHT Zone: Blank o FAN Zone: Blank o TIME/PROG Zone: Current day indicator and current time is displayed o AUX Zone: Blank o FLAME Zone: The FLAME-A Icon is displayed Thermostat Disable Feature • The Thermostat Mode (de
PAGE 6
• Program ON LCD Displays: o MODE Zone: THERMO and either ON or OFF is displayed o ROOM TEMP Zone: Measured temperature is displayed o SET TEMP Zone: SET TEMP is displayed o LIGHT Zone: Blank o FAN Zone: Blank o TIME/PROG Zone: Current day indicator, current time, and Program status (P1ON or P2-ON) is displayed o AUX Zone: Blank. o FLAME Zone: If Thermostat is ON, the Flame-A Icon is displayed. If Thermostat is OFF, display is blank.
PAGE 7
• The Room Temperature Limit Shutdown feature will operate in MANUAL ON, THERMOSTAT ON mode, and PROGRAM ON modes. If the room temperature reaches 95 deg. F or greater, the transmitter will automatically change to MANUAL OFF mode and send a MANUAL OFF command to the control module.