Service Manual User Manual

Hydraulic System
9-63
Auxiliary Hydraulics Legend
1. Shuttle Valve
2. Bulkhead Fitting Support Bracket
3. Tube Assembly, Outer-Aux. Hydraulics (Rear)
4. Tube Assembly, Inner-Aux. Hydraulics (Rear)
5. Swivel Run Tee, #10
6. Tube Assembly, Inside-Aux. Hydraulics (Front)
7. Tube Assembly, Outside-Aux. Hydraulics (Front)
8. 45° Bulkhead Elbow, SAE 10 - O-Ring Face Seal
9. 90° Bulkhead Elbow, SAE 10 - O-Ring Face Seal
10. Connector, Union, SAE 10 - O-Ring Face Seal
11. Twin Hose Clamp Set, 0.62"
12. Cover Plate
13. Twin Weld Plate
14. Bulkhead Nut, SAE 10 - O-Ring Face Seal
15. Hex-head Capscrew, 5/16-18 x 1-1/2"
16. Hex-lock Elastic Nut, 1/4-20
17. Plain Washer, 1/4"
18. Hex-head Tap Bolt, 5/16 x 2-1/2" Gr. 5
19. Hex-lock Elastic Nut, 5/16-18
20. Twin Hose Clamp Set, 0.78"
21. Cover Plate
22. Twin Welding Plate
23. Hose, 1/2" ID x 340"
24. Female Quick Disconnect, SAE 8-8 ORB - Female Internal
25. Bulkhead Connector, SAE 8 - Str. Thd. ORB x O-Ring Face
Seal
26. Dust Plug
27. Dust Cap
28. Male Quick Disconnect, SAE 8-8 ORB - Female Internal
29. Reducer, SAE 10 - O-Ring Face Seal x SAE 6 - O-Ring
Face Seal
30. Tube Nut, SAE 10 - O-Ring Face Seal
31. Spring Lockwasher, 5/16"
32. Connector, SAE 8 - Str. Thd. ORB x O-Ring Face Seal
33. 90° Elbow, SAE 6 - Str. Thd. ORB x O-Ring Face Seal
34. 90° Elbow, SAE 6 - Str. Thd. ORB x O-Ring Face Seal
swivel
35. 45° Elbow, SAE 6 - Str. Thd. ORB x O-Ring Face Seal
36. Hose, 1/2" ID x 35-1/2"
37. Hose, 1/2" ID x 39"
38. Bulkhead Nut, SAE 8 - O-Ring Face Seal
39. Hose, 3/8" I.D. x 31-1/2"
40. Hose, 3/8" I.D. x 18"
41. Connector, SAE 6 - Str. Thd. ORB x O-Ring Face Seal
42. Male Run Tee, SAE 6 - ORFS tube end x Str. Thd. O-Ring
43. Hose, 3/8" I.D. x 18"
44. Hose, 3/8" I.D. x 22"
Model 3606 • Origin 10/99