Service Manual User Manual

ManualsBrandsSkyTrak ManualsSpecial machinery3606

Model 3606

•

Origin 10/99

Foreword

SKY TRAK Model 3606

Service Manual

This manual is designed to provide the service techni-

cian with complete information on the maintenance and

repair of the Sky Trak International SKY TRAK Model

3606 rough-terrain material handler.

Particular effort has been made to produce a manual to

serve as a reference handbook for the experienced

service technician, but also provide essential step-by-

step procedures for the professional development of

the less experienced person. Remember that even the

best manual in the world is no substitute for an appro-

priate education, skill development that comes through

experience alone, safety, wise and judicious discern-

ment, and, ultimately, proper performance of service

procedures.

There are many variations in service environments and

skill levels of repair technicians, as well as procedures,

techniques, tools, and service parts. A service manual

cannot possibly anticipate all such variations and

provide advice or cautions for each one. Accordingly,

any departure from the instructions in this manual must

take into consideration both personal safety as well as

vehicle integrity.

This service manual provides general directions for

accomplishing service and repair procedures with

tested, effective techniques. Following the procedures

in this manual will help assure safety and equipment

reliability. Appropriate service methods and proper

repair procedures are essential for the safety of the

individual doing the work, for the safety of the operator,

and for the safe, reliable operation of the vehicle. All

references to the right side, left side, front, and rear are

given from the perspective of the operator's position,

facing forward (see figure below).

The

Section Contents

allows the user to quickly locate

any desired section. Each section begins with its own

table of contents, and, where applicable, an informative

introduction and exploded-view illustration appears, to

show the location of major section components.

Provision for supplementary information is made by

Trak International in the form of Service Bulletins,

Service Campaigns, Service Training Schools, the

OmniQuip web site, other literature, and through

updates to the manual itself. Comments and sugges-

tions for improvement are welcomed and encouraged.

All information, illustrations and specifications con-

tained in this manual are based on the latest product

information available at the time of publication

approval. Trak reserves the right to make changes and

improvements to its products, and to discontinue the

manufacture of any product, at its discretion at any time

without public notice or obligation. When additional

information is desired to satisfy a situation not covered

sufficiently, consult the nearest Sky Trak International

distributor, or the Sky Trak International Service

Department at 1-414-268-8959.

FRONT

REAR

LEFT

RIGHT

FRONT REAR

TOP

BOTTOM

MS2240

All references to direction are as viewed from the operator’s position, facing forward.