Service Manual

General Information and Specifications
2.12
Model 8042, 10042, 10054 Legacy Rev. 10/03
2.5 SPECIFICATIONS
2.5.1 Vehicle Dimensions
a. Model 8042 (With Standard 12-Ply, 13.00-24
Tires)
Description
(A) Length (Without Attachment) 225.25" (5.721 mm)
(B) Width 98.25" (2.495 mm)
(C) Height (Boom Lowered) 99.4" (2.525 mm)
(D) Wheelbase 119.5" (3.035 mm)
(E) Tread Center 84.0" (2.134 mm)
(F) Ground Clearance 17.25" (438 mm)
(G) Turning Radius, Curb to Curb 156.0" (3.962 mm)
(H) Turning Radius, Clearance 158.3" (4.021 mm)
(I) Maximum Lift Height, Boom Extended 41' 11" (12,8 m)
(J) Maximum Lift Height, Boom Retracted 21' 6" (6,5 m)
(K) Maximum Below Grade Depth, Boom Extended 3' 8" (1.105 mm)
(L) Maximum Reach, from Front of Front Tires 26' 8" (8,1 m)
(M) Maximum Reach at Maximum Lift Angle,
Boom Extended
58.0" (1,7 m)
(N) Maximum Reach at Maximum Lift Angle,
Boom Retracted
-36.5" (-927 mm)
(O) Maximum Reach at Minimum Lift Angle,
Boom Extended
25' 7" (7,8 m)
(P) Maximum Boom Lift Angle 68.5
°
(Q) Minimum Boom Lift Angle -8.0°
(R) Angle of Departure 26°
Attachment Tilt Angle:
(S) At Minimum Boom Angle - UP 11.9
°
(T) At Minimum Boom Angle - DOWN -102.0°
(U) At Maximum Boom Angle - UP 88.4°
(V) At Maximum Boom Angle - DOWN -25.5°
Frame Sway Angle (Not Shown):
Right 10.0
°
Left 10.0°