Service Manual

2.19
Model 8042, 10042, 10054 Legacy Rev. 10/03
General Information and Specifications
2.5.3 Attachment Weights
Note: Attachments listed below are for all models, except where specified.
Std 48" Carriage with Shaft 456 lb (205 kg)
Std 60" Carriage with Shaft 526 lb (239 kg)
Std 72" Carriage with Shaft 677 lb (307 kg)
48" Side Tilt Carriage with Shaft and Cylinders 687 lb (312 kg)
60" Side Tilt Carriage with Shaft and Cylinders 752 lb (341 kg)
72" Side Tilt Carriage with Shaft and Cylinders 770 lb (347 kg)
52" Swing Carriage with Shaft and Cylinders 950 lb (428 kg)
72" Swing Carriage with Shaft and Cylinders 1,135 lb (511kg)
Bucket, 1.125 yd
3
(0,860 m
3
) 760 lb (345 kg)
Broom, 8 ft (2,4 m) 1,100 lb (499 kg)
Pallet Forks (8042 only)
2" x 4" x 48" (5 x 10 x 122 cm), quantity: 2
278 lb (127 kg)
Pallet Forks (10042 and 10054)
2.25" x 4" x 48" (5,7 x 10 x 122 cm), quantity: 2
312 lb (141 kg)
Block Forks 2" x 2" x 48" (5 x 5 x 122 cm), quantity: 6 480 lb (218 kg)
Lumber Forks, 1.75" x 7" x 60" (4 x 18 x 152 cm),
quantity: 2
466 lb (211 kg)
12 ft Truss Boom (8042 only) 470 lb (213 kg)
15 ft Truss Boom (10042 and 10054) 525 lb (238 kg)
Auger Drive Unit 285 lb (129 kg)
Auger Mounting Frame 180 lb (82 kg)
Auger (Various Sizes Available) Varies
Auger Extension (Various Sizes Available) Varies