Service Manual

3.11

Model 8042, 10042, 10054 Legacy Rev. 03/04

Boom

3.3.2 Intermediate Boom Removal

1. Remove the inner boom as described in Section

3.3.1, “Inner Boom Removal.”

2. At the front of the outer boom (19), remove the

capscrews (20), lockwashers (21) and flat

washers (22) holding the top wear pads (23) to the

inside of the outer boom. Label the wear pads as

“Top Left” and “Top Right” sides. Save the

capscrews, lockwashers, flat washers and wear pad

inserts (24).

3. At the front of the outer boom (25), remove the

capscrews (26), lockwashers (27) and flat washers (28)

holding the side wear pads (29) and shims (30) to

the inside of the outer boom. Label the wear pads as

“Left Side Upper/Lower” and “Right Side Upper/Lower.”

Save the capscrews, lockwashers, flat washers,

shims and wear pad inserts (31).

4. Remove the capscrews (32) and lockwashers (33)

holding the center wear pad spacer mount (34) to

the front of the outer boom. Save the capscrews and

the lockwashers.

WARNING: Wear protective footwear

with reinforced toe caps and slip-resistant

soles. Failure to comply can result in foot or

other bodily injury from crushing, slipping or

falling.

WARNING: NEVER lift a heavy object

without the help of at least one assistant or a

suitable sling and hoist. Failure to comply can

result in death or serious personal injury.

MH0980

MH0990

MH100032