Service Manual Manual

8-15
6036, 6042, 8042, 10042, 10054
Hydraulic System
8 N/A Brake Valve
(Service Brake
Pressure)
minimum
550 psi
(38 bar)
With engine at idle, depress and hold brake pedal.
DO NOT turn steering wheel. DO NOT overstroke
the brake pedal. Check pressure. If pressure is
incorrect, refer to Section 8.7.4, “Brake Test.”
9DAuxiliary
Hydraulics
3000 psi
(207 bar)
With engine at low idle, move auxiliary control lever
left or right. Hold control lever over relief and check
pressure. If pressure is incorrect, check main relief
per location 3.
10 N/A Stabilizer
Cylinder
75-150 psi
(5,2-10,3 bar)
With the engine at idle, check the pressure of the
cylinder.
Test
Location
Adjustment
Location
Component
Description
Pressure
Reading
Pressure Test Procedures