Operation Manual

CAMERA SETUP continued
Multi-Device Settings
In the Multi Device Settings page, you can see all devices searched in the LAN.
The ‘1st Device’ is the default IP camera. You can add more cameras to the list in the network for
monitoring. The web browser software supports up to 9 IP cameras simultaneously.
To add cameras to the LAN
Click ‘The 2nd Device’ and double click the IP camera from the ‘Device List in LAN’. The Alias Host and
HTTP Port will fill in automatically. Enter the correct User Name and Password then click ‘Add’. Add more
cameras in the same way.
To add cameras to the Internet
Firstly, make sure the camera added can be accessed on the Internet with the IP address or DDNS domain. (as:
http://202.96.133.134: 9008 or http://ipcamera.dyndns.org:9008).
Enter the Host in the format: 202.96.133.134 port:9008 or Host: ipcamera.dyndns.org port:9008. Enter the
correct User Name and Password then click ‘Add’. Add more cameras in the same way.
Basic Network Settings
If the router that the IP camera connects to has a DHCP function, you can choose ‘Obain IP from
DHCP Server” and fill in the network parameters manually.
HTTP Port - In most cases, you can leave this value as 80, however, if your Internet Service Provider blocks this
port, you may have to switch to another port number such as 8005.