Operation Manual

ACCESSING THE WIFI CAMERA
Using the WiFi Function
To use the wireless functions of the IP Camera a wireless router is required. Follow the instructions
below to get started after the camera has been mounted properly.
1. Use the Network cable to connect IP Camera to the LAN.
2. Enter IP Camera Tool to search for the IP camera.
3. When IP address of the camera is listed in the Result Field of the IP Camera Tool, it means the
basic configuration is completed.
4. Set the security settings in Internet Explorer on the PC when you view it for the first time.
5. Login to the web browser of the IP camera.
6. Now you can use the IP Camera as a Visitor, Operator or Administration in the LAN.
7. Enter the wireless router setup page and enter the SSID, Channel, Security Way (NONE,
WEP), Authentication Type and Encryption. NOTE: The product supports WEP and WAP
security encryption.
8. Click
Submit to reboot the device.
9.
Wait at least 30 seconds then unplug the ethernet cable and the power supply. Then power on the camera
ensuring only the power supply is connected. After 30 seconds, if the LED blinks, it indicates the IP camera is
working in WiFi mode.
Connect to the Internet through ADSL directly
1. Use the Network cable to connect IP Camera to PC.
2. Enter IP Camera Tool to search for the IP camera.
3. Login to the IP camera web browser page as an Administrator.
4. Enter the ADSL Settings page to input ADSL User Name and password.
5. Enter DDNS Settings Page and enable the DDNS service and click ‘Submit’ to reboot the camera.
6. Connect IP Camera to the ADSL directly, you can access the Camera from Internet by the domain
name.
NOTE: Choose the option ‘Report ADSL IP by Mail’, for the ADSL IP address to be sent via Email.