Operation Manual

ACCESSING THE WIFI CAMERA continued
Connect to the Internet using a router to access the Internet
Follow the steps to use a router to access the Internet by shared ADSL. If a router is set for dial-up
Internet access, setting an ADSL dial-up account and password on the IP Camera is not required.
1. Use the Network cable to connect IP Camera to the LAN.
2. Enter IP Camera Tool to search for the IP camera.
3. Login to the IP camera web browser page as an Administrator.
4. Enter DDNS Settings Page and enable the DDNS service and click ‘Submit’ to reboot the camera.
5. Access the Camera directly from the Internet by using the domain name.
Static IP address users
Static IP address users do not need to use DDNS for remote access. When the settings of the IP
camera in LAN mode complete, you can access the Camera directly from the Internet by the WAN IP.
You can obtain the WAN IP address in two ways.
1: Obtain the WAN IP from a Website
You can discover this easily by opening on a computer using the same connection as the IP camera
and entering this address: http://www.whatismyip.com. The page at this address will show you the
current WAN IP.
2: Obtain the WAN IP address from the router
1. Obtain the IP address of the router (LAN Gateway address), User Name and Password for logging
into the router.
2. Enter the LAN IP address of the router (ie:192.168.1.1) in the address bar of your PC browser to
log on to the router.
3. Open the Status page to find out the WAN address of the router (ie: 116.25.51.115).