Operation Manual

CAMERA SETUP continued
Please note that if you are using the camera on a wireless network you will need to
first configure the camera for wired use, before you programme your wireless settings
in to it.
1. Insert the Installation CD into your PC CD drive and the installation screen should appear
automatically. If it does not, click ‘Start > Run> Browse...’ to locate the CD on your computer .
2. Double click ‘IPCamSetup.exe’ and install the software as instructed.
3. Click Next, to complete the software installation.
The computer will restart upon completion of the installation and a new icon will appear on the
desktop automatically called ‘IP Camera Tool’.
4. Double click the icon to start the IP Camera Tool software. The software is designed to search the
Local Area Network (LAN) for any connected IP cameras or devices.