Operation Manual

CAMERA SETUP continued
After searching, the software will give one of 3 results:
Connected IP cameras are located on the LAN - All the IP cameras will be listed and will be
displayed in the result field as shown below.
No IP Camera found within LAN - After about 1 minute search, the result field will show ‘Not
Found IP Server’ and the software application will shut down automatically.
The IP Cameras installed within LAN do not share the same subnet with the monitoring
PC. A prompt will be shown in result field ‘Subnet doesn’t match, double click to change!’ Double
click the mouse button and select ‘Network Configuration’ to set the IP address of the Camera to
the same subnet as LAN.
When you select an IP camera from the list and click the right mouse button, there are five options:
- Basic Properties
- Network Configuration
- Upgrade Firmware
- Refresh Camera List
- Flush Arp Buffer
Basic Properties
View device information such as Device ID, System Firmware Version, Web UI Version.