Operation Manual

User Manual

Chapter 3: Installation

3.1 Install Hard Disk

NOTICE: Don’t take out HDD when DVR is running.

Make sure the HDD is set to be MASTER according to the hard drive manual.

I. If your product comes with a removable HDD drawer (optional), please refer below:

(1) Take out the hard drive drawer from the DVR side panel，Connect the power cord and data cable to hard disk;

(2) Put the hard drive drawer back into the DVR (Make sure the drawer is firmly inserted to the DVR) and then

lock the hard drive drawer.

II. If your product does not come with a removable HDD drawer, please refer below:

(1) Remove the screws around the top cover;

(2) Remove the top cover carefully;

(3) Connect the power cord and data cable to hard disk carefully;

(4) Use the provided screws to fix hard disk on the rack inside and then replace the top cover of the case.

3.2 Connecting Camera and Monitor

There are 4/9 camera inputs and 2/1 Monitor outputs with BNC connectors (Refer to 2.2 Rear Panel).

3.3 VGA Output (optional)

There is 1 CRT or LCD monitor output with VGA port.

3.4 Connecting Power Supply

Please only use the power adapter supplied with the DVR.