Operation Manual

User Manual
7
5.6 Video Quality
5.7 Record Schedule
Setting the Record Schedule allows you to customize the type of recording
depending on the time of day.
NO-RECORD [ white]: DVR will not record during the time.
NORMAL-RECORD [ red]: DVR will record continuously.
SENSOR-RECORD [S]: DVR will record when sensor or motion is triggered.
NOTE: In order to activate the record schedule press the [] record button when
viewing the cameras. After pressing the [] record button if schedule is set to
“NORMAL-RECORD” the DVR will start to record immediately; if the schedule is
set to be “SENSOR-RECORD” the DVR will not start recording until a motion is
detected by the DVR or an installed sensor is triggered.
Video Quality has 4 different settings:
Highest, High, Normal and Low.
The higher the video setting, the
better quality images, however higher
quality images require more hard drive
space.
Press
[SEL] to change the quality
setting.
The time line indicates 24 hours of a
day based on AM/PM (0 = 12).
Press [▲, ▼, ◄ or ►] button to
select a time point, press [SEL] to modify
the recording mode.