Operation Manual
User Manual
22
Note: Please firstly make sure you have right PTZ parameter setting (details please refer
to User Manual-Section 5.2.6.3) on DVR, then you could control PTZ camera through your
mobile phone.
The captured images will be saved to the defaulted path (ExplorerProgram
FilesMoveeyePhoto file).
If you use this program first time or need to change parameter settings, please click
[Setup] button to enter into the window shown as Picture 6.
Picture 6
Auto-connect: When tick-selecting [Auto-Connect] option, the mobile phone will be
auto-connected to the DVR.
History: Clicking the button will allow you auto-record all the log histories.
Click any area of screen to toggle display modes between normal view and full screen.
2.Symbian System Mobiles：
1 ） First you need to copy a program named as “ASee_AL_3rd
_0723.sisx” or
“See_AL_5th_0723.sisx” that is included on the CD provided by the DVR to the mobile
phone (shown as Picture 7). Generally the program is defaulted to save into mobile
storage card.
Note: “
See_AL_3rd_0723.sisx” apply to S60 - The 3rd edition operate system Mobile, and
“See_AL_5th_0723.sisx” to S60 - The 5th edition operate system Mobile
Picture 7 Picture 8 Picture 9
2) Click the program “ASee_AL_3rd
_0723.sisx” to start the installation shown as Picture 8
3) Choose Phone memory or SD card as an installation location shown as Picture 9.
4) Click [Continue] button to make sure the application program you installed may visit
network or dial phone when popping-up the dialog box shown as Picture 10.
5) After successful installation system will prompt you “Installation finished” shown as
User’s Name：herein indicate the user name which have
been set on DVR-[Mobile Set] menu.
Password: herein indicate the password which has been set
on DVR-[Mobile set] menu.
Server: indicate public IP address connected to DVR or
dynamic domain name used by DVR
Port: indicate the server port which has been set to your
DVR.
Notes: enter one channel number you want to monitor
Click【ok】to confirm the above setting , and system will return
back the previous menu.