Operation Manual

User Manual
30
5.3.4.6 DDNS Set
DDNS (Dynamic DNS) is a service that register a domain name and the floating IP
address with the DDNS server so that the domain name can be routed to the IP address
even if the IP address is changed in a dynamic IP system.
User can visit a remote DVR by using DDNS on above three types (Static, DHCP and PPPoE)
Picture 5-39
 User Name: Input a user name registered before applying for a domain name;
 Password: Input a password you set when registering a user name.
Click [Apply] button and restart the DVR; and then enter the domain name (such as:
http://superdvr.3322.org:8080
) to visit your remote DVR.
5.3.5 Alarm
5.3.5.1 Motion
Click [Main menuAlarmMotion] to enter into the interface shown as Picture 5-40
 Latch time: you can set how long the buzzer will sound when object move is detected
(10s, 20, 40s, 60s);
 Channel: allow you enable/disable the motion
function for any channel.
 Area: Click the [Setup] button to enter into area setup
interface shown as Picture 5-41.
 Sensitivity: allow you to set sensitivity level of
motion detection from higher to low with 8 being
the most sensitive.
 Alarm out: allow you connect external alarm
sensor.
You can apply for a DDNS account for free at the
web www.3322.org
or www.dyndns.org.
You can register on DVR2009.3322.org or
dyndns.org website and get a domain name, user
name, and password.
 Server: select DDNS provider
 Host name: input the host domain name you
have registered at dynamic domain name system,
such as: DVR2009.3322.org;
Picture 5-40