User's Manual

- 7 -
1. INTENDED USE
Freezing of Gait Aid System (hereinafter referred to as “the product”) is used to collect Freezing of Gait (FoG)
data and alleviate FoG through visual and auditory prompting,help people with Parkinson's Disease improve their
gait.For FoG's patients.
2.SAFETY INFORMATION
WARNING
1. Do not place or store this device near an open flame or heat source.
2. Do not use a damaged power cord or outlet.
3. Do not use other charger that is not designed for this product char
4. Patients using cardiac pacemakers or other electro-stimulation devices should not use this device.
5. Do not plug or unplug the power cord with wet hands.
6. Do not give self-judgment of the data and results to give treat
7. Class 1 laser product，Laser has radiation, avoid directing the laser beam towards the eye of any person.
8. Do not use this product in a place where there is a flammable gas which might cause an explosion.
9. The user must perform a safety check on the system before each use, and ensure that the system can be
safely used and working properly.
10. When the patient's body is connected to other devices at the same time, the total amount of leakage
current may exceed the allowable limit and pose a potential hazard to the patient.
11. Equipment or devices interconnected with this product must comply with the requirements of
GB9706.1-2007 of "Medical Electrical Equipment Part 1: Safety General Requirements". Equipment or
devices that have not been tested by a national inspection agency may not be interconnected with this
product.
12. Although all patient contact parts have undergone bio-compatibility testing, very few people may have
allergic reactions and should be discontinued for patients with allergic reactions.
13. The various accessories of this product cannot be replaced at randomly. If you need to replace it, you
should use the accessories provided by the company or the same model, and standard accessories
attached to the system, otherwise it may bring safety, bio-compatibility, etc. bad consequences of the
aspect.
14. If the product falls unexpectedly or causes other malfunctions, it cannot be used.
15. Repairs should only be carried out by qualified service personnel designated by the manufacturer.
16. Avoid contact with wounds and scars.
17. Do not use the instrument in high-voltage equipment or in a high-static environment, as it may cause