Owner Manual

ManualsBrandsSkywalker Sports ManualsBackyard PlaySwivel Teeter Totter

Model

CHOKING HAZARD

due to small parts

Adult assembly required

Please retain for for future reference.

IMPORTANT

Two capable adults required

for all the assembly procedure.

Failure to follow this warning

could result in serious injury

and/or property damage.

WARNING

Assembly Installation, Care Maintenance

and User Instructions Manual

Skywalker Holdings LLC

PO Box 574, Brigham City, UT 84302

Model

Read all precautions and

instructions in this manual before

using this equipment. Save this

manual for future reference.

Maximum occupancy 2 users.

Maximum weight capacity .

80 lbs

AGES 4 to 8

__________

STT100

____

™

Summary of content (12 pages)

PAGE 1
Assembly Installation, Care Maintenance and User Instructions Manual STT100 Model __________ ! WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum occupancy 2 users. Maximum weight capacity . 80 lbs AGES 4 to 8 Two capable adults required for all the assembly procedure. Failure to follow this warning could result in serious injury and/or property damage.
PAGE 2
Read and understand warnings listed below before using this product. Failure to follow these warnings may result inserious injury and/or property damage. Owner must ensure that all players know and follow these rules for safe operation of the system. Model • Adult supervision is required at all times when the teeter totter is used by children. • To reduce risk of entanglement, keep small children away from the teeter totter area at all times.
PAGE 3
BEFORE YOU BEGIN Thank you for selecting a Skywalker Holdings Teeter Totter. The Teeter Totter will provide many years of backyard fun. Your Teeter Totter comes equipped with warnings and instructions for the assembly, care, maintenance, and use. This information must be read by all Teeter Totter supervisors and communicated to or read by all users before any person is allowed to use the Teeter Totter.
PAGE 4
PLAYGROUND SURFACING MATERIALS INFORMATION The following information is from Section 4 of the United States Consumer Product Safety Comission’s (USCPSC) Outdoor Home Playground Safety Handbook for playground surfacing material. X3. SECTION 4 OF THE CONSUMER PRODUCT SAFETY COMMISSION’S OUTDOOR HOME PLAYGROUND SAFETY HANDBOOK X3.
PAGE 5
USER INSTRUCTIONS Observing the following statement and warnings reduces the likelihood of serious or fatal injury. 1. The Teeter Totter is designed for up to 2 persons and not to exceed 80 lbs. total weight limit. 2. Read all instructions and complete all assembly before using. 3. Instruct children not to walk close to, in front of, behind, or between moving items.Instruct children to keep a safe distance away to keep from being struck by items in play. 4.
PAGE 6
PARTS LIST FOR TEETER TOTTER Key No. Qty. Description Key No. Qty.
PAGE 7
PARTS LIST FOR TEETER TOTTER 9 11 10 M8X18 Bolt M8X50 Bolt SAFETY INSTRUCTIONS M8X62 Bolt 12 M10X75 Bolt FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE AND WILL VOID WARRANTY. Owner must ensure that all players know and follow these rules for safe operation of the system. To ensure safety, do not attempt to assemble this system without following the instructions carefully.
PAGE 8
1 3 Rotation pole Assembly 12 1 Turret Assembly M10X75 Bolt 15 M10 Locknut 2 Support Pole Insert the three support poles (2) into the turret assembly (1). Make sure the buttons snap into place. 1 2 Attach the rotation pole assembly (3) to the turret assembly (1) using the M10X75mm bolt (12) and M10 locknut (15). Do not tighten the bolt completely to ensure that the change point turns smoothly.
PAGE 9
2 10 4 Seat Pole Assembly 14 M8X50 Bolt M8 Locknut Attach the seat pole assembly (4) to the rotation pole assembly (3) using two M8X50mm bolts (10) and two M8 locknuts (14). Repeat this step on the other side of the weight system.
PAGE 10
3 5 Handle 6 Seat 10 M8X50 Bolt 11 M8X62 Bolt 14 M8 Locknut Attach the handle (5) to the seat pole assembly (4) using two M6X50mm bolts (10) and two M8 locknuts (14). Repeat this step on the other side of the weight system. 5 10 4 14 Install the seat (6) to the seat pole assembly (4) using two M8X62mm bolts (11) and two M8 locknuts (14). Repeat this step on the other side of the weight system.
PAGE 11
4 7 Limit Frame 8 Cushion 9 M8X18 Bolt 13 16 M8 Washer 17 M6X15 Bolt M8 Spring Washer Install the Limit Frame (7) to the seat pole assembly (4) using two M8X18mm bolts (9), two M8 spring on washers (17) and two M8 washers (16). Repeat this step the other side of the weight system. 4 16 17 9 7 Install the cushion (8) to the Limit Frame (7) using M6X15mm bolts (13). Repeat this step on the other side of the weight system. Note: Make sure all the bolts in the steps above are tightened.
PAGE 12
LIMITED WARRANTY Skywalker Holdings, LLC warranties its products to be free from defects in material and workmanship under normal use and service conditions. The steel frame is warranted for one (1) year after the date of purchase. All other parts are warranted for ninety (90) days after the date of purchase. Wind or weather damage is not warranted. All warranty coverage extends only to the original retail purchaser from the date of purchase.