User Manual

1
ULTIMATE TENSILE PULL-OUT VALUES [lb]
Anchor Grip Range Drill dia.
Screw
size
Plywood
3/8"
Drywall
1/2"
Drywall
5/8"
Drywall
TA
®
1/8"-1/4"
5/16" #8
124 - - -
TB
®
3/8"-1/2"
5/16" #8
175 97 143
102*
TC
®
5/8"-3/4"
5/16" #8
- - - 159
• Holding strength for a TOGGLER hollow-wall anchor varies directly with the strength and condition of the substrate, the screw size,
and the extent of the screw engagement—and inversely with variations in hole diameter and the distance of the load from the wall.
• All figures in pounds. Pull-out values based on independent laboratory tests done according to U.S. Government standards. They
should be used as guides only and cannot be guaranteed. The age, condition, and capacity of the substrate must be considered.
• Industry standards recommend 1/4 of ultimate test load.
The latest generation of the ever-evolving
TOGGLER hollow-wall anchor technology...
• Strongest of all plastic toggle anchors—reinforces the
wall or ceiling & leads the load away from the hole
• Vibration & shock proof—won’t damage walls or ceiling
• Can use a screw gun—anti-rotation fins prevent spinning
•
Greatest grip range for each anchor (see inside)
• Accepts greatest range of screw sizes in each anchor
• All install in only a small 5/16" hole
• Pre-install without the screw
• Key-activated
positive locking system
• Screw can be removed and reinserted in same anchor
without loss of holding power
• Corrosion-proof when used with stainless steel screws
• Nonmagnetic, nonconductive
Our third generation of TOGGLER hollow-wall
anchors provide vibration-proof anchoring of
light to medium loads in hollow walls & ceilings
... but also hold securely when they encounter an
unexpected solid, such as a wooden stud, or when
performing as wedge anchors in materials with
thicknesses above their normal wall grip range.
New patented improvements in the original design
have increased holding strength and abuse
resistance. Holding arms have been thickened and
strengthened without increasing insertion hole size,
and major stress points have been significantly
reinforced without increasing anchor size.
Use TOGGLER SNAPTOGGLE
®
toggle bolts for
highest hollow-wall holding strength.
TOGGLER
®
HOLLOW
-WALL ANCHORS
ANCHOR SYSTEM
Technical Bulletin
Benefits:
In solid substrates (concrete,
masonry, brick, etc.) or in drywall
thicker than its grip range, the
TOGGLER hollow-wall anchor
holds securely as a wedge or
expansion anchor
1/4"
1/2"
* #10 screw; anchor used as wedge anchor [not toggled fully open], since substrate is thicker than grip range
ULTIMATE SHEAR PULL-OUT VALUES [lb]
Anchor Grip Range Drill dia.
Screw
size
Plywood
3/8"
Drywall
1/2"
Drywall
5/8"
Drywall
TA
®
1/8"-1/4"
5/16" #8
265 - 126 -
TB
®
3/8"-1/2"
5/16" #8
- 126 167
214*
TC
®
5/8"-3/4"
5/16" #8
- - - 237
1/4"
* #10 screw; anchor used as wedge anchor [not toggled fully open], since substrate is thicker than grip range