Use and Care Guide

10
ASSEMBLY
Make Things Easier for Yourself!
This manual is designed to ensure that the Jungle GYM Monkey Bar can be assembled
successfully by anyone. Most people find that by setting aside plenty of time, assembly
will go smoothly.
Before beginning assembly, carefully read the following information and
instruction:
1.
5
5
5
5
5
17
5
15
1
2
7
7
1
7
7
7
7
18
18
18
18
18
18
18
18
13
13
13
13
13
13
15
16
17
15
* One person can assemble alone. However, two people is recommended.
* For help indentifying parts, use the PART IDENTIFICATION CHART on page 7
and PARTS LIST on page 8.
* Place all parts in a cleared area and remove the packing materials. Do not
dispose of the package materials until assembly is completed.
*Tighten all parts as you assemble them, unless instructed to do otherwise.
Place Top Frame 1 (1) and Top Frame 2 (2) on the ground as shown below.
Locate two Yellow Plastic Protectors (13) and a Top Cross Bar (5). Attach the Plastic Protectors
to the Top Cross Bar with two M6x40mm Button Bolts (15),two M6 Washers (16) and two M6
Locknuts (17).
Now attach the assembled Top Cross Bar (5) to the Top Frame 1 (1) and Top Frame 2 (2) with
M8x35mm Button Bolts (18) and M8 Arc Washers (7). Do not tighten the Bolts.
Repeat this process to assemble and attach the remaining Top Cross Bars to the top frame pieces.