Use and Care Guide

12
4. To attach to the Jungle Gym Base,
remove two Plastic Caps from the
Jungle GYM Base. Attach theTop Frame(1)
to the Jungle GYM with eight M8x20mm
Button Bolts (9), four M8 Arc Washers (7)
and four M8 Washers (11).
Finally press two D50 Inner Caps (12)
into theTop Frame (1).
Tighten all the bolts.
4
12
12
9
9
11
9
11
7
7
9
11
9
9
11
7
7
12
9
9
11
9
11
7
7
5.Use the hammer to place the anchor into the ground in the direction as shown below.
The anchor is used is to prevent tipping, overturning, or lifting of the support members.
Note: The anchor is not provided in this product and needs to be purchased seperately. We
recommended using the size of anchor shown below.
.
(the Anchor)
8mm
34mm
305mm
Anchor
(12 in)