Warranty Guide

ASSEMBLY
9
Make Things Easier for Yourself!
This manual is designed to ensure that the Jungle GYM Swing Set can be assembled
successfully by anyone. Most people find that by setting aside plenty of time, assembly
will go smoothly.
Before beginning assembly, carefully read the following information and
insruction:
* One people can assembly. Two people is recommended.
* For help indentifying parts, use the PART IDENTIFICATION CHART on page 7, page 8
and PART LIST on page 13.
* Place all parts in a cleared area and remove the packing materials. Do not dispose of
the package materials until assembly is completed.
* Tighten all parts as you assemble them, unless instructed to do otherwise.
1
4
5
6
9
9
14
14
15
15
16
16
17
17
18
18
1. First find the upright 1 (4) and the Upright 2
(5) with marked 4,5.
Attach two plastic Protectors (15) to the
Cross Bar (6) with two M6X40mm Button
Bolts (17), two M6 Washers (16) and two M6
Locknuts (18).
Then fix the upright 1 (4) and the Upright 2
(5) with two M8 Arc Washers (9) and two
M8X35mm Button Bolts (14).
Do not tighten the Bolts.
hole
hole