ASSEMBLY, MAINTENANCE, & USER MANUAL MODEL #SWTC8 WARNING Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference. Maximum user weight 175 lbs. Skywalker Holdings LLC P.O.
TABLE OF CONTENTS Part List.....................................................................................................................................................................................3 Part Identification........................................................................................................................................................4-5 Exploded Drawing...............................................................................................................
PART LIST Key No. Qty. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 # # 4 4 4 1 1 1 56 8 4 4 4 4 14 4 1 1 8 1 1 T-joint Socket Leg Brace Enclosure Net Jump Mat Frame Pad Springs Foam Straight Tube Curved Tube End Cap Pole Cap Self-tapping Screw (2 Spare Parts) M5x44mm Bolt Screw Driver Spring Tool Top tube UserManual & Safety Placard Set of ASTM Frame Labels ORDERING REPLACEMENT PARTS We get it... sometimes things happen.
PART IDENTIFICATION Before you begin, take a look at the drawings below to make sure you have all the parts! The numbers in the squares to the left (key numbers) will help you identify the parts during assembly.
13 Self-tapping Screw (x14) 14 M5x44mm Bolt (x4) 16 Spring Tool (x1) 17 Top Tube (x8) 5 15 Screw Driver (x1)
EXPLODED DRAWING (12) (12) (14) (14) (8) (8) (10) (12) (14) (14) (12) (10) (13) (13) (10) (10) (8) (8) (9) (8) (8) (13) (13) (4) (8) (9) (9) (8) (6) (2) (27) (1) (27) (27) (2) (13) (27) (13) (13) (11) (5) (7) (1) (1) (13) (13) (27) (27) (2) (11) (2) (13) (27) (13) (1) (27) (13) (11) (3) (3) (3) 6
ASSEMBLY READ THIS BEFORE YOU BEGIN • You’ll probably need at least 2 adults and 2 hours to assemble your trampoline (of course, that depends on what model you have, and whether or not you’re secretly a superhero). • We’ve provided a Phillip’s screw driver to help with assembly, but you’re more than welcome to use your own tools. Many find that using a power drill and a rubber mallet makes things easier. • Use gloves to protect your hands from pinch points during assembly.
ASSEMBLY STEP 3 3 Leg Brace (x4) Insert a leg brace (3) into a T-joint and socket at the same time, and tighten with two self-tapping screws (13). 13 Self-tapping Screws (x8) Now that you’re a pro at step 3, repeat this step until you have four frame pieces assembled. (3) (13) (13) (17) (1) (2) (17) STEP 4 This step is a breeze! (But it is a good idea to grab a friend to help). Just flip the four frame sections so that the legs are now supporting the frame.
STEP 5 5 Jump Mat (x1) If the enclosure net (4) is already attached to the jump mat (5), go to step 7. (We knew you were an overachiever!) If not, no worries, it’s easy to assemble. Place the jump mat on the ground. The warning label should be on the top, and the ID label should be on the back. Model: SWTC8 Part #: 7013 Description: 8 Foot Mat Made in China Skywalker Holdings, LLC PO Box 547, Brigham City, UT, 84302 USA www.skywalkertrampolines.
ASSEMBLY STEP 7 Place the jump mat (5) on clear ground inside the frame. Make sure the two warning decals align with two T-joints! Warning label T-joint Enclosure door Warning label T-joint STEP 8 7 Springs (x1) 16 Spring Tool (x1) You may want to use gloves for this step! Before you begin, make sure each V-ring has been threaded through the holes on the enclosure net. Make sure the enclosure door is lined up with a T-joint.
STEP 9 Now, repeat step 8 on the other side of the trampoline. Make sure to count the exact number of V-rings and frame holes so each one corresponds! You now have attached two V-rings to the frame holes using two springs. 7 Springs (x1) (8) Enclosure door STEP 10 7 Springs (x2) Next, find the middle of the two springs by counting the exact number of V-rings and frame holes.
ASSEMBLY STEP 11 7 Next, place four springs into the V-rings just left of the four remaining sockets, and stretch the springs until they reach the frame holes just left of the sockets. You now have attached eight V-rings to the frame holes using eight springs. There should be six V-rings and six frame holes in between each spring. Springs (x4) (7) Enclosure door Socket STEP 12 Now, place one spring directly to the left of each spring already placed.
STEP 13 6 Frame Pad (x1) Place the frame pad (6) on top of the springs. Adjust the frame pad so that the slits are directly above the T-sockets. Important: Don’t use the trampoline without the frame pad. It’s designed to protect your little jumpers! Trust us on this one. Socket (6) Slit of Pad STEP 14 Look under the trampoline. Find the straps that are attached to the underside of the frame pad (6). Position the outer straps so that one strap is on each side of the frame.
ASSEMBLY STEP 15 9 Straight Tube (x4) 10 Curved Tube (x4) 8 If you want, take a snack break because you’re MORE THAN HALFWAY DONE, and you deserve it. This next step is easy. Just slide all the straight tubes (9) and curved tubes (10) into foam (8).
STEP 17 Important: The pole cap (12) has two sides; one with a hexagon hole, and one with a round hole. 12 Pole Cap (x4) Insert the pole cap into one strap ring found on the top of the enclosure net. Make sure the hexagon hole is facing the net, and the round hole is facing you. Hexagon hole Strap Hole Round hole Rund hole (12) (4) STEP 18 14 M5x44mm Bolt (x4) Next insert a curved tube (10) into the pole cap (12).
ASSEMBLY STEP 19 Starting from the enclosure door, lift one of the assembled poles and insert the straight tube (9) into the socket. Repeat this process to assemble the three remaining poles. Helpful tip: When inserting the enclosure poles, pull back on the middle of the poles! Pull back Socket Socket STEP 20 11 Next, insert the end caps (11) into the bottom of the sockets.
STEP 21 LAST STEP YOU’RE IN THE FINAL HOME STRETCH. Using the included plastic tie, attach the safety placard to the trampoline frame close to the enclosure door. Frame Safety Placard STEP 22 Congratulations on completing your new trampoline! (See... we knew you could do it!) So here comes the real question... are you satisfied with this completed product? If you are, go ahead and write a review on the retailer’s site you bought it from. We’d really appreciate it...
MAINTENANCE & CARE INFORMATION Congratulations and high five on successfully assembling your new Skywalker Trampolines 8' Round Trampoline with Enclosure! Now, the best way to keep your new trampoline in tip top shape, is to periodically check for: • • • • • • • Missing, improperly positioned, or insecurely attached frame padding, netting, enclosure tubes, or foam sleeves Punctures, frays, tears, or holes worn in the mat, frame padding, netting or foam sleeves Deterioration in the stitching or fabric of th
INSTRUCTIONS FOR USE To reduce the risk of serious injury, read and follow all of the warnings, precautions, and instructions in this manual before you use the trampoline enclosure. Warnings and instructions for care, maintenance, and use of this trampoline and enclosure are included to promote safe enjoyable use of this equipment. 1. 2. 3. It is the responsibility of the owner and supervisors of the trampoline and enclosure to make sure all users obey the safety instructions given in this manual.
WARNING LABEL PLACEMENT WARNING Do not land on head or neck. Do not attempt or allow somersaults. Landing on your head or neck can cause serious injury, paralysis, or death, even when landing in the middle of the mat. Use trampoline only with mature, knowledgeable supervision. WARNING Only one person at a time on the trampoline. Do not allow more than one person on the trampoline. Use by more than one person at the same time increases the chance of injury.
METHODS OF ACCIDENT PREVENTION THE SUPERVISOR’S ROLE IN PREVENTING ACCIDENTS It is the responsibility of the supervisors of trampoline users to provide knowledgeable and mature supervision. They need to know and enforce all of the rules and warnings printed in this manual to minimize the likelihood of accidents and injuries. They also need to inform users of these rules.
INSTRUCTIONS & MODEL LESSONS The following lessons are examples of an instructional program. They should follow a complete discussion and demonstration of body mechanics between the supervision and the student(s). 1. 2. 3. 4. Mounting and dismounting: Demonstration and practice of proper techniques. Fundamental bounce: Demonstration and practice. Breaking: Demonstration and practice. Breaking on command. Hand and knee drop: Demonstration and practice, stressing four-point landing and alignment.
Lesson 5: Seat Drop Lesson 6: Front Drop 1. Land in a sitting position with your legs parallel to the mat. 2. Place your hands on the mat beside your hips. 3. Push with your hands to return to an erect position. 1. Start from a low bounce and land on the mat in a prone position. 2. Keep your head up and your arms extended forward on the mat. 3. Push with your arms to return to an erect position. Lesson 7: Half Turntable Lesson 8: Swivel Hips 1.
TRAMPOLINE SAFETY INFORMATION In trampoline use, as in all active recreational sports, participants can be injured. However, there are steps that can be taken to reduce risk of injury. In this section, primary accident patterns are identified and the responsibilities of supervisors and jumpers in accident prevention are described.
ENCLOSURE SAFETY INFORMATION NEED FOR TRAMPOLINE ENCLOSURE SAFETY A trampoline enclosure is a recreational product. The information on this page identifies important safety precautions. The precautions are not all-inclusive, because an enclosure can be used in ways that this manual cannot cover completely. To prevent pinches and cuts during enclosure use, a frame pad must be installed on the trampoline (see the trampoline manufacturer’s instructions).
LIMITED WARRANTY Skywalker Holdings, LLC warrants its products to be free from defects in material and workmanship under normal use and service conditions. The steel frame is warranted for three (3) years after the date of purchase. All other parts are warranted for one (1) year after the date of purchase. Warranty coverage extends only to the original retail purchaser from the date of original purchase. This warranty is only valid concerning products used for residential use.
NOTE: SKYWALKER HOLDINGS, LLC IS NOT RESPONSIBLE OR LIABLE FOR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE PRODUCT OR OTHER DAMAGES WITH RESPECT TO ANY ECONOMIC LOSS, LOSS OF PROPERTY, LOSS OF REVENUE OR PROFITS, LOSS OF ENJOYMENT OR USE, COST OF REMOVAL, INSTALLATION OR OTHER CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES.
