Overseas Development Ltd. Flat Panel Television User Manual

ManualsBrandsSkyworth ManualsFlat Panel TVLCD-22L19

Description:

Job No.

MODEL:

Brand Name:

P/No.

MANUAL(8M34A)

22L19

LCD-22L19

SIZE:A5

REV:0

Engineering Dept:

Artwork By:

Checked By:

Approved By:

Scale:

Date:

2009-06-04

95120H skyworth

Instruction Manual

22" LCD TV/MONITOR

Summary of content (20 pages)

PAGE 1
Instruction Manual LCD-22L19 22" LCD TV/MONITOR SIZE:A5 Description: MANUAL(8M34A) Job No. 95120H Brand Name: MODEL: 22L19 P/No.
PAGE 2
SAFETY PRECAUTIONS Read all of the instructions before operating the set. Keep these instructions well for later use. PRODUCT The ventilation should not be impede by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc. Do not push any objects of any kind into this unit through the cabinet slots as they could touch the current carrying parts or short-circuit parts, resulting in fire, electric shock, or damage to the unit.
PAGE 3
SAFETY PRECAUTIONS USE ENVIRONMENT Do not install this equipment in a confined space such as a book case or similar unit. To prevent injury, this apparatus must be securely attached to the wall mount fastened on the wall. Place the set on a place that allows good ventilation. Do not use the set near damp, and cold areas, protect the set from overheating. Keep away from direct sunlight.
PAGE 4
CONTENT SAFETY PRECAUTION .................................................................................1 CONTENT ..................................................................................................... 3 INTRODUCTION, FUNCTIONS AND FEATURES ....................................... 4 EXTERNAL SCHEMATIC AND INSTALLATION ........................................... 5 FRONT PANEL ................................................................................... 5 BACK PANEL .....................
PAGE 5
INTRODUCTION, FUNCTIONS AND FEATURES BRIEF INTRODUCTION: Thanks for your purchase of our digital high-definition LCD television! This product with diverse functions is designed to fulfill the optimum requirements from commercial, industrial and household uses. LCD television possesses the display function of both TV and PC. It features advanced picture performance, smaller in size and lighter in weight, meanwhile, consumes less power and makes no radiation.
PAGE 6
EXTERNAL SCHEMATIC AND INSTALLATION FRONT PANEL Note: The graphics are for representation only. 1 2 3 4 5 6 7 10 10 9 8 1.AV/TV Button 2.Menu Button 3.Program Up Button 4.Program Down Button 5.Volume Up Button 6.Volume Down Button 7.Standby Button 8.Power Indicator 9.Remote Sensor 10.
PAGE 7
EXTERNAL SCHEMATIC AND INSTALLATION BACK PANEL Note: The graphics are for representation only. AV IN HDMI 1 VGA 2 Y Pb 3 Pr S-VIDEO 4 R-AUDIO-L VIDEO 5 VGA AUDIO IN 75 6 ANT EARPHONE 7 8 1. HDMI:Connect HDMI input signal from signal source such as DVD. 2. VGA: Connect a PC via a VGA cable. 3. YPbPr (Component input): Connect YPbPr signal from signal source such as DVD. Share the same AUDIO input with AV. 4. S-VIDEO: Connect S-VIDEO Share the same AUDIO input with AV. 5.
PAGE 8
EXTERNAL SCHEMATIC AND INSTALLATION ANTENNA/CABLE CONNECTION There are two kinds of antenna in use. VHF TV ANTENNA TWO KINDS OF ANTENNA UHF TV ANTENNA No need to install adapter To TV VHF/UHF ANTENNA jack (Note 1) U/V MIXER COAXIAL ANTENNA Need to install adapter VHF/UHF (75 ) (Note 2) FLAT CABLE 1. Connect the plug of the antenna cable or CATV cable to the cable (not provided with this unit), then connect to the antenna input of this unit for best reception. 2.
PAGE 9
EXTERNAL SCHEMATIC AND INSTALLATION REMOTE CONTROL 1. STANDBY BUTTON Press to turn the TV on or off(standby). 1 2 3. NUMBER BUTTONS Press to enter a channel number . 4. AV/TV BUTTON Press to display the signal source selection menu. 3 4 6 5 7 5. RECALL BUTTON Press this button to return to the previously viewed program. 8 9 6. SLEEP BUTTON Press to select a time period after which the TV will turn itself off. 11 10 16 2. MUTE BUTTON Press to mute or restore the TV sound. 13 14 7.
PAGE 10
EXTERNAL SCHEMATIC AND INSTALLATION REMOTE CONTROL 18. SOUND TYPE BUTTON(NICAM) Press this button to select different sound type. Relevant sound types in TV SOURCE as below: 1. MONO: MONO 2. STEREO: MONO, STEREO 3. DUAL : MONO, DUAL1, DUAL2 NOTE: This button is unavailable for models without NICAM function. 19.TEXT BUTTON(OPTION) This button is used for entering the teletext MENU. 20.MIX BUTTON(OPTION) the button is used as closing /opening the teletext Background. 21.
PAGE 11
EXTERNAL SCHEMATIC AND INSTALLATION For using the remote control, follow these instructions: 1. Open the back cover of the remote control, then insert two AAA batteries with polarities matching with the marks inside the battery compartment. Then, close the back cover. 2. Point the remote control towards the infra-red remote sensor on the main unit. If there is an obstacle between the main unit and remote control, the remote control may not operate properly. 3.
PAGE 12
SETUP TV There are several steps you need to follow before you can turn on the TV. Follow the instructions below to set up and turn on your TV. Operation could be different base on existence of hard power switch. 1. Plug the end of the power cord into an appropriate wall outlet and connect the antenna cable or CATV cable. 2. Turn on the TV.
PAGE 13
MENU CONTROL This section explains the menus of your TV. Each menu is outlined and detailed to help you get the most from your TV. BASIC OPERATION 1. Press MENU on the remote control or on the TV key panel to display the main menu. 2. Press t/u and p/q to highlight the desired menu/item. 3. Press t/u to change the setting. 4. Press MENU to save setting and go back to last menu. 5. Press EXIT to exit the menu.
PAGE 14
MENU CONTROL SOUND SETTINGS Sound mode Select the audio mode as you desired. The audio mode are Standard,Music, Film, Voice. SOUND Voice Sound mode Bass Treble Balance Surround Sound type Move Bass Adjusts the lowest part of the sound. Treble Adjusts the highest part of the sound. Off FM MONO Select MENU Return Balance Adjusts how much audio (loudness) gets sent to the left and right speakers. Surround Set surround effect on or off This function is not available in TV mode.
PAGE 15
MENU CONTROL Fine tuning Tune RF frequency finely. Skip Sets the current channel to skip or not. Notes: 1. If the channel is set to skip, you can not select it by pressing PROGRAM UP/DOWN on the remote control. You can select it exactly by entering channel No. Using number buttons on the remote control. 2.If a channel is set to skip, the channel No. colour shows on the screen is red. Fav.channel Accesses favorite channel setting. Press FAV. key on remote control to navigate favorite channels.
PAGE 16
MENU CONTROL FUNCTION SETTINGS Language Select you desired OSD language. FUNCTION English 16:9 Language Zoom OSD halftone Parent ctrl. Move Select MENU Return PARENT CTRL. New pin code Front panel Lock TV Lock AV Lock S-VIDEO Lock YPBPR Move On On On On On Select Return PAREN CTRL. On On Lock VGA Lock HDMI Move MENU Select MENU Return Zoom select your desired picture zoom effect. You can select 16:9 or 4:3(only available for wide screen modesl).
PAGE 17
SHORTCUT FUNCTIONS This section explains the shortcut and convenient functions . PICUTRE shortcut 1. Press the PICTURE button on the remote control to display the current picture state. 2. Press the PICTURE button repeatedly to select different picture effect. 3. The on screen display will disappear in 3 seconds if you stop adjusting. Note: You can select Standard, Bright, Personal or Soft. SLEEP shortcut 1. Press the SLEEP button on the remote control to display the sleep time. 2.
PAGE 18
SHORTCUT FUNCTIONS Z-/Z+ shortcut( only available for wide screen models) Press to change the screen format: 4:3, 16:9. ( Only available for wide screen models) FAV. shortcut 1. Press the FAV. button on the remote control repeatly , it will select FAV. channel cyclely. 2. Set your favorite programs before this operation. INFO shortcut Press this button to display the settings on the screen. RECALL shortcut Press this button to return to the previously viewed program.
PAGE 19
TROUBLESHOOTING NO PICTURE, NO SOUND 1. Check if the fuse or circuit breaker is working. 2. Plug another electrical device into the outlet to make sure it is working or turned on. 3. Power plug is bad contact with the outlet. 4. Check the signal source. NO COLOR 1. Change the color system. 2. Adjust the saturation. 3. Try another channel. Black-white program may be received.
PAGE 20
SPECIFICATIONS Mode: LCD-22L19 2W+2W Audio output power (L+R): Working voltage: 100-240V~ 50/60Hz Rated power consumption: 60W Screen size - diagonal: 54.8cm Dimensions (W x D x Hmm): 528 x 200 x 390mm Net weight: 4.