Manualshelf

Quick Start Guide

ManualsBrandsSlamtec Manuals2 & 3 Wheel RobotsSDP Mini RPlidar Experimental 2WD Robot Platform
123
1.
2.
3.
4.
SQ103 SLAMWARE SDP Mini Quick Start
On this page, we will introduce how to connect the SDP Mini to our mobile applications and computer. If you are a new comer for SLAMTEC
products, it's fine to start from here.
On this page
Step 1: put batteries in
Step 2: launch SDP Mini
Step 3: control on mobile
application
Step 4: download and use
SLAMWARE SDK
Related pages
Download
Step 1: put batteries in
SDP Mini requires only 8 AA batteries to run well. After receiving the product, please put batteries in the battery holder first. The steps for taking
out the battery holder are as below:
loosen the two thumb screws next to the battery holder anti-clockwise;
remove the protective board;
pull out the battery holder carefully and put batteries in;
push the battery holder and protective board back, and then 󵜮tighten the screws clockwise to fix the battery holder

Summary of content (3 pages)