Installation Guide

Support Brackets:

Slide or snap brackets into groove on bottom

of front panel.

5. Position new

assembled cover

with wall brackets

below element,

then slip new cover

over back panel.

Optional:

Screw brackets

to existing back

panel with

supplied

self-drilling

screws.

7. Attach end caps, corner pieces or chosen

accessories as required.

PREPARE EXISTING BASEBOARD

1 Remove old end caps.

2. Remove existing front panel.

3. Remove any existing damper sections.

PREPARE NEW ALUMINUM COVER

Aluminum Baseboard Replacement Covers for High Output Baseboard

Quick Installation Guide

Appropriate gloves and eye protection should be worn during installation. For Use With Hydronic Baseboard Only!

Video Installation Intructions

You can watch a demonstration video of how

to install your new Revital/Line Replacement

Cover at www.slantfin.com