Specification

4. Room control damper
helps control individual room tem-
perature. Slant/Fin’s unique pivot
and damper mounting assembly
provide the straightest, most
responsive damper available.
Factory assembled. Holds any
setting from fully open to fully
closed or any setting in-between.
Ordinary baseboard dampers may
leave large spaces even when
closed. The Slant/Fin damper,
when closed, effectively reduces
convection air flow.
5. High performance heating
element. Maximum heat
output. Fins won’t loosen.
Double bent aluminum fins
pack extra heating surface in a
slimmer enclosure. Interlocking
tongue-and-groove collars
permanently bond fins to each
other and to the tubing. Stops
“pings and clicks”. Tight bond
assures maximum heat-transfer
efficiency. End fins are of plated
steel for extra ruggedness.
6. No-noise expansion cradles.
Self-adjusting velvet smooth
expansion cradles eliminate
noisy metal-to-metal contact with
bracket and enclosure. Cradle
slides silently over support
bracket as heating element
expands and contracts.
5
4
2
Wall streakage eliminated. Top panel and damper form a shield to keep dust from settling into baseboard interior, and to
deflect heated air away from the wall, into the room. Back panel has no holes or slits to leak air behind the back of the
baseboard causing wall streakage.
Replace old radiators with modern low-profile baseboard. Give yourself decorating freedom by installing low-profile
Slant/Fin baseboard in place of your old hot water radiators. You’ll have more wall space and you are free to locate furni-
ture and drapes near or even touching the baseboard heating. To replace steam radiators, use Slant/Fin Multi/Pak 80
b
aseboard.