Install Instructions

Field Adaptable Inside Corner
INSTALLATION INSTRUCTIONS
For bay windows and any other place where the corners are not square, it's easy to make an inside corner piece
that fits perfectly when you use Slant/Fin's field adaptable inside corner. The illustrations below picture Fine/Line 30
baseboard. Follow the same procedure for Fine/Line 15 or Multi/Pak 80 field adaptable inside corners.
F
INE/LINE 15
FINE/LINE 30
M
ULTI/PAK 80
1. Using cardboard, cut a template to the exact angle
of a corner.
3. Place template so the corner is on the line belo
w
point A, and its edges are over points B and C.
Mark new bend lines.
5. For Multi/Pak 80 only - front door may have to be
flattened to fit. If so, notch flange bottom of front
removing material.
2. On the inside of the top corner piece provided,
draw a vertical line from point A (center of top)
do
wn towards the hinge.
4. Cut off the portion abo
ve the corner of the new
angle as shown. Bend flange along new bend
angle.
6. Front view.
Publication IC-40 Printed in the USA 799
©Slant/Fin Corp.
SLANT/FIN CORPORA
TION, Greenvale, N.Y. 11548 • Phone: [phone]
F
AX:
[phone] •
Canada:
Slant/Fin
L
TD/L
TEE,
Mississauga, Ontar
io
www.slantfin.com