Submittal Sheet

ManualsBrandsSlant/Fin ManualsBaseboard Heaters8 ft. Multi/Pak 83A Baseboard

Multi/Pak 90

Furnish and install as shown on the plans

ulti/Pak

0—slope-top fin-tube enclosures with ele-

ents, required mounting components and all acces-

sories as manufactured by Slant/Fin Corporation. Cover

shall be of two interlocking sections: a top cover and

ront cover. Top cover will be common to one-tier (90-

4) and two-tier (90-21) models. (Optional: A knob-actu-

ated damper shall be provided). Top cover shall consist

of stamped grille with pencil-proof air discharge louvers.

ront cover shall interlock with top cover to form lateral

ecorative panel. Front cover shall be removable with-

out removal of the top cover.

Interlocking top cover and front cover shall both be

abricated from 18-gauge galvanized steel in pre-paint-

d Nu-White baked enamel finish or color as per speci-

fication. Brackets and hangers shall have a galvanized

finish.

rovide and install Slant/Fin’s internal splice plate.

he internal splice plate shall provide an internal slip

connection without creating unsightly weld marks on

the front of the cover. The resultant joint will be a neat

utt joint; the need for an external splice plate is elimi-

ated.

Fin-tube element(s) shall be Model___________.

Provide lengths and capacities as scheduled on plans.

Furnish required channeled bra

cket-hanger assemblies

ith heavy flag brace for rigid front panel and element

support. Provide all required accessories for complete

installation. Cover accessories shall be telescopic and

shall match enclosure color

Multi/Pak 93

Furnish and install as shown on the plans

Multi/Pak

93—flat-top fin-tube enclosures with ele-

ments, required mounting components and all acces-

sories as manufactured by Slant/Fin Corporation.

Cover shall be of two interlocking sections: a top

cover and front cover. Top cover will be common to one-

tier (93-10) and two-tier (93-17) models. (A knob-actuat-

ed damper shall be provided.) Top of enclosure shall

consist of stamped grille pre-painted and with pencil-

proof air discharge louvers. Front skirt shall interlock

with top panel to form lateral decorative panel. Front

skirt shall be removable.

Inter

locking top cover and front cover shall both be

fabricated from 18-gauge steel in Nu-White baked

enamel or as custom matched as per specification.

Brackets and hangers have electro-galvanized finish.

Fin-tube element(s) shall be Model___________.

Provide lengths and capacities as scheduled on plans

Furnish required channeled bracket-hanger assemblies

with heavy flag brace for rigid front skirt and element

support. Provide all required accessories for complete

installation. Cover accessories shall be telescopic and

shall match enclosure color.

Multi/Pak 95

Fur

nish and install as sho

wn on the plans

Multi/P

95—flat-top fin-tube enclosures with ele

ments, required mounting components and all acces-

sories as manufactured by Slant/Fin Corporation.

ver shall be of two interlocking sections: a top

cover and front cover. Top cover will be common to one-

tier and two-tier models. (A knob-actuated damper shall

be provided.) Top of enclosure shall consist of stamped

rille pre-painted and with pencil-proof air discharge

louv

ers

. Front skirt shall interlock with top panel to form

later

al decor

ativ

e panel.

ront skirt shall be removable.

Interlocking top cover and front cover shall both be

fabricated from 18-gauge steel in Nu-White baked

enamel or as custom matched as per specification.

Brackets and hangers have electro-galvanized finish.

Fin-tube element(s) shall be Model___________.

Provide lengths and capacities as scheduled on plans.

Furnish required channeled bracket-hanger assemblies

with heavy flag brace for rigid front skirt and element

support. Provide all required accessor

ies for complete

nstallation. Cover accessories shall be telescopic and

hall match enclosure color.

JA-14, JA-21 or JA-28 Series

urnish and install as shown on the plans JA

lope-top fin-tube enclosures with elements, required

ounting components and all accessories as manufac-

tured by Slant/Fin Corporation. Cover shall be of one-

piece construction. (A knob-actuated damper shall be

rovided.) Top part of enclosure shall consist of

tamped grille with pencil-proof air discharge louvers.

(Optional: A knob-actuated damper shall be provided.)

Cover shall be fabricated from 18 (16 or 14) gauge

alvanized steel. Cover finish shall be galvanized or

owder coated to a color as per specification. Brackets

and hangers shall have a galvanized finish. Cover pan-

els to join using Internal Splice Plates, resultant joint

as covers butting to one another resulting in a clean

oint without unsightly weld marks on front of cover.

(Optional: Cover with anodized aluminum grill in

place of pencil-proof louvers. Cover shall be fabricated

rom 18 (16 or 14) gauge galvanized steel. Cover finish

hall be galvanized or powder coated to a color as per

specification. Brackets and hangers shall have a galva-

nized finish. Covers panels shall join using slip joint

resulting in a clean joint.)Please note that knob-actuat-

ed damper is not available on aluminum grill cover.

(Optional: A full height back

panel shall be provided

f 20 gauge galvanized steel.)

Provide all required accessories for complete

installation. Cover accessories shall be telescopic and

shall match enclosure color

Fin-tube element(s) shall be Model___________.

Provide lengths and capacities as scheduled on plans.

Furnish required channeled bracket-hanger assemblies

with heavy flag brace for rigid front panel and element

support.

JL-10 Series

Furnish and install as shown on the plans JL-10 slope-

top fin-tube enclosures with elements, required mount-

ing components and all accessories as manufactured

by Slant/Fin Corporation.

Cover shall be of one-piece construction. Top part

of enclosure shall consist of stamped grille with pencil-

proof air discharge louvers. (Optional: A knob-actuated

damper shall be provided.)

Cover shall be fabricated from 18 (16 or 14) -gauge

galvanized steel finish or powder coated to a color as

per specification. Brackets and hangers shall have a

galvanized finish.

(Optional: Cover with anodized aluminum grill in

place of pencil proof louvers. Cover shall be fabricated

from 18 (16 or 14)-gauge galvanized steel. Cover finish

shall be galvanized or powder coated to a color as per

specification.

ets and hangers shall have a galva-

nized finish. Co

er panels shall join using slip joint

resulting in a clean joint.) Please note that damper is

not available on aluminum grill cover.

(Optional:

A full height bac

k panel shall be pro

vided

of 20-gauge galvanized steel.)

Provide all required accessories for complete

installation. Cover accessories shall be telescopic and

shall match enclosure color.

Fin-tube element(s) shall be Model___________.

Pro

vide lengths and capacities as scheduled on plans

Furnish required channeled bracket-hanger assemblies

with heavy flag brace for rigid front panel and element

suppor

FS Series

Furnish and install as shown on the plans “FS”

Ser

ies free standing enclosures with elements, required

mounting components and all accessor

ies as man

ac-

tured b

y Slant/Fin Cor

por

ation.

Cover shall be of one piece construction. Enclosure

shall be (FS-7, FS-14, FS-21) and shall have (1,2 or 3)

tier element.

op part of enclosure electro galvanized

shall consist of stamped grille with pencil-proof air dis-

harge louvers. All enclosures shall have female-to-

emale slip joint connection with interlocking internal

splice. The internal splice provides additional strength

ith a nearly invisible joint.

over shall be fabricated from 18 (16 or 14) gauge

alvanized steel or as custom color matched as per

specification.

Brackets and hangers shall be channeled steel in

ot dipped wiped coat galvanized finish. Brackets and

angers shall be Model_____________. Provide

lengths and capacities as scheduled on plans.

Furnish required channeled bracket-hanger assem-

lies with heavy floor mounting flange for rigid front skirt

nd element support.

Provide all required accessories for a complete

installation. Enclosure accessories in electro galvanized

teel shall be telescopic and match enclosure color.

TBG Series

Furnish and install as shown on the plans “TBG”

eries top & bottom slope enclosures with elements,

equired mounting components and all accessories as

manufactured by Slant/Fin Corporation. Cover shall be

of one piece construction. Enclosure shall be (TBG-17,

TBG-24) and shall have (1 or 2) tier element. (A knob

actuated damper shall be provided.) Top and bottom

slope of enclosure shall consist of stamped gri

lle with

encil-proof air discharge louvers. All enclosures shall

have female-to-female slip joint connection with inter-

locking internal splice. The internal splice provides addi-

tional strength with a near

ly invisible joint. (Optional: A

full height back panel shall be provided of 20-gauge

steel in hot dipped wiped coat galvanized finish.)

Cover shall be fabricated from 16 gauge (14 gauge

option) steel in galvanized finish or as custom matched

as per specification.

Brackets and hangers shall be channeled steel in

hot dipped wiped coat galvanized finish. Fin-tube ele-

ment(s) shall be Model_________. Provide lengths and

capacities as scheduled on plans.

Furnish required channeled bracket-hanger assem-

blies with heavy channeled bracket for rigid front skirt

and element support.

Provide all required accessories for a complete

installation. Enclosure accessories in electro-galvanized

steel shall be telescopic and match enclosure color.

R Series

Furnish and install as shown on the plans “R”

Series round top enclosures with elements, required

mounting components and all accessories as manufac-

tured by Slant/Fin Corporation.

Cover shall be of one piece construction. Enclosure

shall be (RL-10, RT-14, RT-21 or RT-28) and shall have

(1, 2 or 3) tier element.

(A knob actuated damper shall

be provided.) T

op par

t of enclosure shall consist of

stamped grille with pencil-proof air discharge louvers.

All enclosures shall have female-to-female slip joint

connection with inter

loc

king inter

nal splice. The internal

splice provides additional strength with a nearly invisible

joint. (Optional: A full height back panel shall be provid-

ed of

20-gauge electro galvanized steel finish.)

er shall be f

abr

icated from 18 (16 or14) gauge

steel in hot dipped wiped coat galv

aniz

ed finish or as

custom color matched as per specification.

Brackets and hangers shall be channeled steel

in hot dipped wiped coat galv

aniz

ed finish. Fin-tube ele-

ment(s) shall be Model___________. Provide lengths

and capacities as scheduled on plans.

Furnish required channeled bracket-hanger assem-

lies with heavy flag brace for rigid front skirt and ele-

ment suppor

Pro

vide all required accessor

ies f

or a complete

installation. Enclosure accessories in electro galvanized

steel shall be telescopic and match enclosure color.

SPECIFICATIONS