Owner's manual

Bobcat Model B-120A and B-200A
2
WELCOME TO OUR VALUED CUSTOMER
You are now the owner of a Slant/Fin Bobcat series gas-fired
boiler, another quality heating product designed and manu-
factured by an industry leader, to provide your family with
many years of reliable comfort and trouble-free performance.
The care and maintenance of your new boiler is important to
prevent a hazardous condition which might result form lack
of proper servicing. Therefore, you should perform regular
“owner” inspections as described in this manual (and report
an
y concerns to a qualified service technician) as well as
hav
e y
our boiler serviced by a qualified service technician at
least once a y
ear, preferably before the beginning of each
heating season.
LIGHTING INSTRUCTIONS
Locate
, read and then follow the procedures on the lighting
instructions label attached to the boiler. For reference, we
have reproduced those instructions in this manual.
DO NOT use this boiler if any part has been
underwater. Immediately call a qualified service
technician to inspect the boiler and to replace
any part of the control system and any gas
control which has been underwater.
WARNING
Should overheating occur or the gas supply
fail to shut off, DO NOT turn off or disconnect
the electric supply to the circulator pump.
Instead,
shut off the gas suppl
y at a location
EXTERNAL to the appliance.
WARNING
SLANT/FIN DOES NOT PERMIT THE USE OF
VENT DAMPERS ON BOBCAT B-120 or B-200
SERIES BOILERS.
O
THER D
AMPERS OR
DEVICES WITH SIMILAR PURPOSE ARE NOT
PERMITTED
.
Keep the boiler area clean and free of all materials that can burn.
NEVER close or reduce openings that supply air for the boiler fire and for ventilation.
Figure 1. Location and identification of parts. (model 120A shown)