STEVEN SLATE - TRIGGER 2 STEVEN SLATE TRIGGER 2 Version: 1.0.
STEVEN SLATE - TRIGGER 2 3 System Requirements Mac This plug-‐in requires an Intel-‐based Mac running OSX 10.6 (Snow Leopard) or later. It is recommended to use mulVcore CPU with a clock speed in excess of 1.7 GHz, 2 GB RAM or above, and a display resoluVon of 1024 x 768 or above.
STEVEN SLATE - TRIGGER 2 4 Installation For new TRIGGER 2 users: Please download and install the new iLok License Manager from hcps://www.ilok.com/ ilm.html. This will allow you to register your plug-‐in onto your iLok Dongle. In order to download your iLok license to you iLok Dongle, please go through the following steps: -‐ 1.
STEVEN SLATE - TRIGGER 2 5 For all users: Important Note All user created .prs Presets, user created .tci’s, and all our “Expansion Packs” (i.e. to date... Deluxe, CLA, Terry Date) will conVnue to work in both TRIGGER 1 and TRIGGER 2. Installation Steps 1.
STEVEN SLATE - TRIGGER 2 6 Browser TRIGGER 2 employs a newly designed Browser for easy navigaVon of samples within your Trigger Instruments folder, by tree view lisVng. Important Note The Browser will show files contained in your set base directory path “only”.
STEVEN SLATE - TRIGGER 2 7 Triggering Operational Key Commands Reset Parameter to Default • Double Click, or ALT+Click (Mac and PC) Fine Control • Hold the CTRL key (PC) or CMD key (Mac) and adjust Clear Slot (Single) • Right Click for Pop-‐Up, CTRL+Click (PC) or CMD+Click (Mac).
STEVEN SLATE - TRIGGER 2 8 Detail Sets the level (threshold) below which the plug-‐in will not trigger from the incoming signal. * Try to avoid sepng Detail to high levels, or to zero. Set it according to the original source audio leakages, and other noise level. Sensitivity Sets the engines sensiVvity level, and has been vastly improved from TRIGGER 1.
STEVEN SLATE - TRIGGER 2 9 Filters Low-‐Cut Acenuates all frequencies below the set cut-‐off point, leaving those above unaffected. High-‐Cut (New to TRIGGER 2) Acenuates all frequencies above the set cut-‐off point, leaving those below unaffected. Both filters can be uVlized to remove unwanted frequency content from the triggering circuit for original source material.
STEVEN SLATE - TRIGGER 2 10 Usage/Setup • Set the input volume first, and raise the level unVl most hits are peaking near the top of the display. This will ensure maximum range for dynamic velocity triggering of our samples.
STEVEN SLATE - TRIGGER 2 11 Blue is the original track. Red is the leakage suppressed on the original track. Note: Red waveform peaks should be a bit higher than the leakage peaks. If the red waveform peaks are too high, you need to decrease the Suppression value.
STEVEN SLATE - TRIGGER 2 12 Triggering Continued... Gate Important Note ‘Gate’ is only acVvated with a TRIGGER PlaVnum license (with an EX license, Gate will be greyed out). -‐-‐-‐-‐ ‘Gate’ is an awesome new feature of TRIGGER 2. The Gate algorithm is the first in its class as “transient driven”, for drum triggering.
STEVEN SLATE - TRIGGER 2 13 parameter sepngs are shared for ‘Gate’ and detecVon, for triggering sample replacement/ enhancement. Once you set the detecVon for triggering, you can simply use ‘Gate’ and its controls to shape the incoming/original source audio. * The Gate only applies to/processes the original source material and not TRIGGER 2 samples.
STEVEN SLATE - TRIGGER 2 14 Setup” secVon. Then, you need to clear the MIDI buffer by pressing “CLEAR BUFFER” bucon, and then you can start to capture a MIDI track. * The MIDI Capture process works only in real-‐Vme mode.
STEVEN SLATE - TRIGGER 2 15 View Curves ALack Sets the iniVal Vme it will take the envelope of the selected Instrument to reach its maximum level auer it has been triggered. Larger values will smooth out the acack phase that corresponds to increasing audio levels.
STEVEN SLATE - TRIGGER 2 16 * Values more than 50 set a posiVve non-‐linear response (which means if you trigger a sou hit on your drum track, it will be replaced by a hard hit from TRIGGER 2, or if you trigger the 64 velocity, TRIGGER 2 will transform it to, for instance, 80).
STEVEN SLATE - TRIGGER 2 17 Settings Respect OS Display Scaling Setting Sepng this opVon ‘YES’ will enable support for DAWs supporVng ReVna Displays, and will work correctly in conjuncVon with Windows' (PC) window scaling display preference opVon (to rescale the plug-‐in GUI at different set resoluVons).
STEVEN SLATE - TRIGGER 2 18 MIDI Output Using TRIGGER 2’s MIDI output you can transform an original audio into a MIDI track, or you can send MIDI directly to any virtual instrument. To set up MIDI output, you need to turn it “On”, choose the MIDI Out channel and note in the Sepngs page.
STEVEN SLATE - TRIGGER 2 19 3rd Party iLok License Transfer Fee When reselling any Slate souware product, there will be a $10 License Transfer Fee in order for us to process the new customer into our user database. It is the responsibility of the seller to inform the buyer of this fee at the Vme of sale.