User's Manual

Using your SleepHalo™
To charge wirelessly, the phone must be placed onto SleepHalo™ with the screen
facing up. The indicator LED on the side will change from red to blue once phone
is correctly placed. Place the phone on the centre of SleepHalo™.
If the red LED ashes, this indicates the phone is not aligned correctly. Fully
remove and then replace. Correct charging can also be conrmed by checking the
screen of your phone for the charge icon.
LED Colour SleepHalo™ Status
Red Standby
Blue Charging
Green Fully Charged (dependent on phone)
Flashing Phone not aligned correctly
Or foreign object detected
LED Indicator
Outline of phone
Use logo for
alignment
SleepHalo™ User Manual V1.1 E&OE
Page 3 of 6