4. GIMBALS MODE FOLLOW: PAN Default mode once powered on. Follow-pan will follow left to right as you move Slick back and forth. When you tilt up and down or side to side, it will keep | Pon axis a level horizon. 5 Site s FOLLOW: PAN & TILT Two clicks of the mode button. Look left to right or up and down, the Go Pro footage will follow you in these directions. Slick will follow your movement, but will keep a level horizon. [ Pan axis @ Stickup ® Tilt Down LOCK Three clicks, All three axis are locked.
5. TIME LAPSE To define the duration of the time lapse, change the mode as follows: Mode 1 {Pan): 5 minutes Mode 3 (Lock): 30 minutes Mode 2 (Pan & Tilt): 15 minutes Power on and click on mode one time and set the slick to () where you want your time-lapse to end. Adjust the tilt up/down arrows for your preferred angle. STEP 2. 2} Click on mode button once for 5 minute time lapse, twice for 15 minute time lapse and three for § a 30 minute time lapse. @ coca 4 STEP 3.
7. CHARGING Charging up your Slick is very simple. Take off the waterproof cap located on the bottom of the gimbals and plug your micro-USE to charge up your unit! You cannot charge the Slick while in use so we suggest bringing along a portable charging pack with you on your adventure! STEP 1. STEP 2. Turn your gimbals over and Insert your micro-USB and connect it to your remove the waterproof cap. laptop or charging unit. 8. TECHNICAL SPECIFICATIONS Operating Voltage (DC) 8.
