Operation Manual

STEP 4
:
ATTACH REMOTE CONTROL IR CABLE
Connect the remote control IR cable to the IR jack on the
Slingbox. Next, place a remote control IR cable head on the top
or bottom of your A/V device so it points at its IR sensor.
Make sure that the head of the remote control
IR cable extends out far enough over the front
your A/V device to send a signal to it. You may
want to affix the remote control IR cables using
the adhesive pads after you've determined their
correct positions.
TIP
:
The IR sensor is on the front of your A/V device. Some sensors are behind
a dark, reddish plastic window. Others may be hidden behind the plastic on the
front of the device. If you don't see the sensor, shine a flashlight on the front of
the device and look for a small bulb similar to the one on the end of
the remote control IR cable. To control more than one device, you
can use the multi-head remote control IR cable that came with your
Slingbox PRO-HD. You can use one or more IR heads per device as
needed.
9
IR SENSOR SIDE VIEW