Operation Manual

Slingbox PRO • Page 7
Best quality.
A connection that
uses the set of
green, blue, and red
cables is called a
component
connection.
Component video
cables carry no
sound, so they must
be used with audio
cables.
To use a component
connection with a
Slingbox
PRO, you
must purchase an
optional Sling
Media
HD Connect cable,
available from your
retailer.
A device with component video splits
the video signal into its three parts:
green, blue, and red.
1. If you have available component
video ports on your video device,
connect one end of the component
video cables to your video device
and the other ends to the VIDEO
IN
ports on your HD
Connect cable.
2. Connect another set of component
cables to the VIDEO
OUT ports on
your HD
Connect cable and then to
your TV.
Don’t connect the yellow cable.
3. Connect one end of the audio cables
to your video device and the other
to the AUDIO
IN ports on your
HD
Connect cable. Connect
another set of audio cables to the
AUDIO
OUT ports and then to your
TV.
White is for left audio.
Red is for right audio.
*IMPORTANT: This port on the Slingbox PRO is for the Slingbox HD Connect cable only. Its physical design
is not intended to accommodate an HDMI connection. To connect the Slingbox PRO to an HD source, use
an HD Connect cable, available separately from your retailer. For more information, go to our web site:
http://www.slingmedia.com
Video info Use these ports and cables Do this
The connector
for the
HD Connect
cable on the
back of the
Slingbox Pro.
See the
important note
below.
*
The HD Connect
cable
The ports on the HD Connect cable