Safety Manual

®
Death or Injury can occur from improper use or care.
Ensure system is connected to base station and will remain within signal
range before use and during use.
Remove sling from service and contact an authorized repair station if:
• System will not connect to base station.
• System alert activates indicating a potential overload condition.
Failure to ensure proper functioning of system can result in undetected
damage and sling failure.
This product contains lithium metal batteries. Under extreme circum-
stances these batteries may catch fire or explode. Do not tamper with the
Check-Fast® Plus Sling Sensor™.
For additional important safety information, inspection, removal and repair follow
Slingmax
®
Guidelines, ASME B30.9, WSTDA RS-HP-1 and Cordage Institute CI
1905 standards.
Check-Fast
®
Plus - User Information
Check-Fast® Plus alerts the user when the sling is overloaded or damaged. Each base station can
monitor up to 50 slings at one time. Typical range is 500ft. An alert will be sent to the base station if
the Check-Fast® Plus system detects an overload. In addition, text alerts (SMS) and email alerts can
be enabled.