User's Manual

iHelmet Hair Growth System (Model: LTD160Pro) User Manual V1.0
21
/
27
It is suggested that the battery should be optimized when storage for two months, otherwise
the running time of battery is significantly shortened. And it is suggested that when user stop to
use iHelmet more than 1 month should keep charging one time per month. Keep battery stored
in a dry place.
5.4 Disposing Your Device
It is important to note that a portion of the iHelmet’s components can be recycled, but it is
illegal for you to dispose of them where you live. Check with a government agency for their
protocols for disposing electronic devices.
Follow local governing ordinances and recycling instructions regarding disposal or recycling of
device components, including batteries.
5.5 Life Expectancy
The life expectancy of the iHelmet is based on independent testing done via the IEC 60068
international standard. The iHelmet uses high quality laser diodes that are rated to exceed
8,000 hours of usage. Based on the independent testing and the rating for the diodes and the
other electronic components, the life expectancy of the iHelmet is 5 years of regular use. In the
life of the device, you can replace the battery, but need to return to factory, use a certified
battery or buy if from qualified authorized store. It is recommended that you read this entire
instructional guide thoroughly before attempting to operate the iHelmet.
6 Frequency Asked Questions
(1) Q: My iHelmet will not turn on
A: Check whether the helmet device is out of power. Make sure the green light is on the
ON/OFF switch.If the helmet is out of power, charge the device until the light on the ON/OFF
switch normally on green.
(2) Q: My iHelmet is turning on, but the laser is not visible
A: Operate the iHelmet APP, touch the “Light” key in the main page, the helmet will connect
to the APP through Bluetooth. Once the connection is built, the laser will be visible.
(3) Q: My iHelmet will not turn off
A: The helmet will turn off within 10 sec after the treatment is completed. Press the
ON/OFF switch at least for 1 sec.
(4) Q: My iHelmet will not turn off